background image

4

SAFETY PARAMETERS IN YOUR PROGRAM:

There are built in safety parameters in your program that you can not change.  These safety controls were built in during the
manufacture and limit the time and temperature of  your steam room.  They  control  the steam room heat time, the maximum
temperature the room will reach and the length of time one steam visit should last.  These parameters are automatically reset
after each use.  Maximum temperature 120

 0

F or 49

 0

C.  Maximum length of steam visit for one cycle - 60 minutes.

WARRANTY  POLICY

For a period of one year from the date of installation, or 18 months from the date of manufacture,
whichever comes first, all parts and assemblies are warranted as to workmanship and materials used
in their manufacture.   There is no cosmetic warranty on installed parts or controls.  Any RELAX-A-
MIST™ products containing defective parts, if returned prepaid to an authorized service depot within
the one year or 18 month time limit, will be repaired free of charge, F.O.B. the authorized service depot
making such repairs.

The Company will not be responsible for any breakdown, damage, or losses, direct or indirect, arising
in contract or in tort from any cause whatsoever, including failure to follow the Relax-A-Mist installation
instructions specifically, careless handling, improper voltage supply, corrosion and/or electrolysis, or
a  buildup  of  minerals  on  the  parts  or  assemblies  for  any  reason  or  from  any  source;  nor  for
transportation and/or other charges incurred in the removal , replacement or repair of defective products
or parts; and there are no warranties or conditions expressed or implied or otherwise applicable, to the
company’s products except as expressly stated herein.

WARRANTY  IS  VOID  IF RESIDENTIAL   STEAM   GENERATOR 

ARE  USED IN  A  COMMERCIAL  INSTALLATION

.

For  product  information  call  1-800-Y-U-STEAM  (1-800-987-8326).

AUTHORIZED  SERVICE  DEPOTS

BRITISH COLUMBIA

ALBERTA

ALBERTA

LEISURE BATHS LTD.

FRASER - BOND LTD.

LEHMANN PLUMBING

6909 Antrim Avenue

9452 Almond Crescent SE

3649  73 Avenue

Burnaby,  BC  V5J 4M5

Calgary,  AB  T2J 1B6

Edmonton, AB  T6B 2T8

TEL   (604) 437-4717

TEL   (403) 253-7533

TEL   (780) 465-4434

or   1-800-987-8326

FAX   (403) 253-7583

FAX   (780) 465-4595

FAX  (604) 437-5776

MANITOBA

ONTARIO

QUEBEC

BALCAEN & SONS LTD.

ACCORD APPLIANCE INC.

THOMAS & SCHMIDT

1392 Pembina Hwy

#17, 750 Oakdale Rd.

2825 rue Sabourin

Winnipeg,  MB  R3T 2C1

North York,  ON  M3N 2Z4

Saint-Laurent,  QC  H4S 1M9

TEL (204) 475-1506

TEL   (416) 743-4181

TEL   (514) 745-1556

FAX  (204) 287-2222

FAX   (416) 743-4183

FAX  (514) 745-4777

Summary of Contents for JR-1

Page 1: ... wire on the back of the Time Temperature control with the male plug connects into the 25 foot wire with the female plug At the steam generator the male plug from the 25 foot wire connects to the female plug located on the side of the steam generator s electrical box marked Timer Switch and 24 VAC The cord set modular female connection must be identified at the steam generator do not plug the swit...

Page 2: ... can not warrant information given regarding steam room materials or construction techniques Final selection of the steam room temperature setting and duration of stay is at the discretion of the operators or owners STEAM GENERATOR START UP and CONTROL PRETEST To start make sure that the electrical and water supplies are turned off and that the programmable switch is not illuminated Turn on the wa...

Page 3: ...ram settings can only be changed when they are flashing When the count down time is complete the display will change to the 3 red bars and the steam generator will shut off You may halt your steam bath program at any time by pushing the on off button Quick Tips For User s Touch the on button displays steam room temp temp shut off setting time in minutes and arrows time up down Touch the temp butto...

Page 4: ...ract or in tort from any cause whatsoever including failure to follow the Relax A Mist installation instructions specifically careless handling improper voltage supply corrosion and or electrolysis or a buildup of minerals on the parts or assemblies for any reason or from any source nor for transportation and or other charges incurred in the removal replacement or repair of defective products or p...

Reviews: