Relaxxnow
13
How to use the Massage Device:
•
Plug the AC power cord connector into the main interface of the unit (make
sure it is plugged in to prevent it from falling down).
•
Plug the AC adapter into the wall outlet. If the indicator light flashes red,
the unit is correctly supplied with power.
•
Place the Massage Device on the body area of your choice
•
Place your hands in the arm straps and keep them taut when applying to
the neck, shoulder, back or hip.
SWITCH ON MASSAGE DEVICE
Press the On/Off button on the control panel.
The red control lamp lights up.
MANUAL MODE
Manual button to adjust the speed and intensity. For a
higher speed the „H“ for „Highspeed“ flashes red. For less speed the „L“ for
„Lowspeed“ lights up.
AUTO MODE
Press the „Auto“ button to enter automatic mode. The unit
switches off automatically after 10 minutes. Please note that in this mode there is
no fluid massage movement, as a natural hand movement imitation takes place.
HEAT MODE
The massage device is equipped with a warming function. If
necessary, proceed as follows: Press the warming function button.
SWITCH OFF THE MASSAGE DEVICE
Press the On/Off button on the control
panel.
EN
