SETUP
1. If needed, fasten the strap around the back of a chair or other support.
2. Connect the adapter cable to the corresponding cable at the side of the mat.
3. Plug the 12V adapter into an outlet.
4. Turn on the device using the controller (instructions on page 5).
5. When finished place the controller in the pouch at the side of the seat cushion
and unplug the adapter from the outlet.
•
Do not setup or use the massager in a bathroom or similary wet/damp areas as
such an environment may reduce the lifespan of the massager mechanism.
•
Ensure the massager is not exposed to direct sunlight or placed near sources of
heat.
Note:
This product produces a warming heat. It is not intended to be used as a
therapeutic heating pad. Please allow a few minutes to reach maximum
temperature. The mat reaches a maximum temperature of 140F after approx. 7
minutes.
3
