Massage Area Buttons:
Select full, upper, or
lower back to designate
the area covered by the
massage.
Rolling Button:
In this mode the massagers
move up and down the
back but do not rotate.
NOTE: Continuing to press
and release the rolling button
will move the massage heads
closer or farther apart.
Spot Button:
While in shiatsu mode, press
to keep the massagers in one
place (while still rotating). Use
the arrow buttons to adjust
the position up or down.
Neck Heat Button:
Press to activate heat in the
neck area. The heat cannot
be turned on if the neck
massage function is not
activated.
Heat Button:
Press to activate heat in the
back area. The heat cannot
be turned on if the back
massage function is not
activated.
Shiatsu Button:
Press to turn the shiatsu
function on/off.
Vibration Button:
Press to activate the seat
vibration.
Press again to
change from low to high
and a third time to shut
off.
Timer Button:
Press to set the massage time
at 5, 10, or 15 minutes.
Neck Button:
Press to activate neck
massage. Press again to
reverse the rotation and
a third time to shut off.
Use the arrow buttons to
adjust the position up or
down.
CONTROLLER INSTRUCTIONS
Power Button:
Press to turn the device on and off.
5
NOTE: When ON/OFF button is pressed for first-time use, the massage mechanism will
automatically move to the lowest position before starting a massage program. The
massage mechanism will always return to this lowest position after the device has
been turned off (during this L.E.D. lights will blink). If electrical supply is interrupted,
the mechanism will revert to the lowest position when power is restored.
