1-877-789-3245 | info@reliance-foundry.com | www.reliance-foundry.com
Embedded Mounting
Martello Bollard Installation
Inspect the installation
. Abrasions should be
covered as soon as possible. For damage repair
or other servicing needs, please contact Reliance
Foundry’s sales department.
STEP 15:
Once aligned, press the cap and concrete anchors
into the wet concrete until the cap sits flat on the base.
Note: Be sure to make any necessary adjustments to the
orientation now. Once the concrete cures, there is no way
to reposition the cover.
Clean the Bollard
STEP 16:
Use a cloth to clean the surface of the bollard
before the concrete cures.
1/2"
STEP 15
R-7651-EM