35. PAN button
The Pan button -35- activates a Balance effect. This effect, depending on the
beat frequency, alternates the signal from the left to the right loudspeaker
side.
Your device synchronises the effects automatically to match the current
BPM value. Use the beat link buttons -36- to change the frequency to match
the beat.
To manually change the beat frequency of the effect, press the Parameter
Time button -25- and regulate the frequency value using the Jog Wheel
(from 0 - 9990 mSec.).
To influence the intensity of the effect, press the Parameter Ratio button -26-
and set the volume with the Jog Wheel (from 0 - 255).
NOTE:
As soon as the Time or Ratio buttons have been activated, the Scratch mode
is temporarily deactivated.
TIP:
This effect is best varied using the beat link buttons.
36. Beat Link Buttons
Press the Beat Link buttons -36- to synchronise the chosen effects with the
speed of the track. Select between a frequency of 1/8, 1/4, 1/2, 3/4, 1/1, 2/1 and
4/1 beat(s); the respective LED is on.
37. BPM button
Your device has a manual and an automatic beat counter. The automatic beat
counter is activated automatically after switching on the device. The display
reads "Auto BPM". Read the currently determined value on the display.
See also item 11/I
38. TAP button
Press the TAP button -38- repeatedly to the beat of the music to manually
determine the speed of the track. The display currently reads the value in
BPM (= beats per minute). Press the BPM button -37- to activate the
automatic beat counter again.
39. Relay/Fader Start Connection Hub
When connecting your player via the connection hub -39- with another
Reloop CD player (which also features a Relay/Fader Start connection hub)
with the enclosed 3.5 jack cord, Relay Play is available. For this, select the
Single Play mode on both players, using the Single/Continue buttons -8-.
Both displays read "Single". Then activate the Play mode on one of the
players with the Play/Pause button -2-. The first track is played; the player
then goes into Pause mode. The first track of the other player is then played;
then this player goes into Pause mode. After that, the second track of the
first player is played, etc.
NOTE:
Your player also supports the Fader Start function. For this, connect the
supplied 3.5 jack cable of the Relay/Fader Start connection hub -39- with
the Fader Start connection hub of a compatible mixing console, such as the
Reloop RMX-40 DSP. By simply operating the fader of a mixing console you
can start or stop playing from the CD player.
33
ENGLISH
IM_RMP2_MK2.qxp 14.01.2009 15:23 Uhr Seite 33
