4
Air Handling Units
Despatch
Side Variability of Unit Connections
Connection side is always determined by the air-flow
direction:
Transport and Handling of Components
Air-handling units are transported to the installation site
either as transport-installation blocks or disassembled (for
transport and handling of disassembled units, refer to the
separate manual).
Loading, unloading and handling can be performed by a
fork-lift truck, a manipulating carriage or a crane. If lifted
by crane, spacer bars must be inserted between the lifting
wires to protect the air-handling unit from being damaged.
If air-handling unit blocks without a base frame are han-
dled, fork-lift truck forks of a sufficient length must be
used to overreach the full depth of the lifted block. If the
air-handling unit block with a base frame is handled, forks
of a sufficient length must be used to overreach both side
beams of the base frame.
Figure 2 –
Handling options
The "Other Danger" warning label situated on the face
side of the service door indicates the hazard of catching
by movable parts.
The service panels covering electrical equipment are
labelled with a "Warning – Danger of Electric Shock"
warning label.
Information and safety labels
AeroMaster CIRRUS air-handling units, respectively indi-
vidual sections, are also labelled with information labels
indicating equipment operation, wiring diagrams, energy
media inlets and outlets and logos of the manufacturer.
Delivery Contents
The following items are enclosed with every delivery of
the air-handling unit:
Accompanying technical documentation
(Installation and Operating Instructions)
Commercial and technical documentation, including
air-handling unit assembly drawing
Connecting material kit
Installation kit
Measuring & control components, respectively
accessories in accordance with the bill of delivery
Transport and Storage
Air-handling units with a base frame of standard height
(85mm) are dispatched on a pallet or transportation
prisms.
Air-handling units equipped with a raised base frame
(with supporting legs) are dispatched without additional
handling means.
Packaging
As standard, the transport blocks of the Cirrus air-handling
units are packed in PE foil and provided with cardboard
and polystyrene protecting guards. The holes in the base
frame can be used to lift the unit by a crane.
Figure 1 –
side variability of unit connections
LEFT-HAND VERSION
RIGHT-HAND VERSION
Air-flow
direction
Figure 3 –
Handling holes in base frame
Each built-in assembly is marked with a type (name)
plate situated on the service panel side. The name plate
includes the technical parameters of the given built-in as-
sembly. The user must ensure that every marking on the
unit components will be readable and intact for the whole
service life of the unit. If damaged, especially if safety is
concerned, the marking must be repaired immediately.
