3. Press the
key to confirm the selection.
The text CODE flashes in the display.
4. Press the
key to confirm the selection.
5. Keep pressing the key until the code 0012 is displayed.
6. Keep pressing the key until the required value is displayed.
7. Press the
h
key multiple times to go back to the main display.
9.3.2
Reading out signals and software versions
You can read out the signals and software versions of the appliance and
the connected control boards, sensors and so on.
1. Navigate to the Information menu.
2. Press the
key to open the menu.
3. Keep pressing the key until the required device, control PCB or
zone is displayed.
4. Press the
key to confirm the selection.
5. Keep pressing the or key until the required value is displayed.
At the end of the cycle, the software version and parameter version of
the selected appliance or control PCB are displayed.
6. Press the
h
key multiple times to go back to the main display.
Fig.73
Step 3
MW-3000422-01
Fig.74
Step 4
MW-3000453-01
Fig.75
Step 5
MW-3000439-01
Fig.76
Step 6
MW-3000439-01
Fig.77
Step 7
MW-3000441-01
Fig.78
Step 2
MW-3000306-01
Fig.79
Step 3
MW-3000451-01
Fig.80
Step 4
MW-3000452-01
Fig.81
Step 5
MW-3000307-01
Fig.82
Step 6
MW-3000308-01
9 Settings
7665063 - v.05 - 18102018
57
