5
•
To retract the trimmer, push the top rear of the trimmer downward until it
locks under the trimmer release button.
E
Tips for best results
•
Ensure your skin is dry. Always hold the shaver at right angles to the skin so
that all three heads are touching the skin with equal pressure.
•
Use moderate to slow stroking movements. The use of short linear motions
in stubborn areas may obtain a closer shave, especially along the neck and
chin line.
•
DO NOT press hard against the skin in order to avoid damage to the foil
heads.
C
CARE FOR YOUR SHAVER
•
Care for your appliance to ensure a long lasting performance.
•
We recommend you clean your product after each use.
•
The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head after use with warm water.
•
Keep the switch in the “off” position when not in use.
,
DRY CLEANING
•
Ensure the appliance is switched off and unplugged from the mains.
•
Pull the foil assembly up to remove from the hair pocket.
•
Tap out the excess hair shavings and use a cleaning brush if necessary.
•
Do not clean the shaving foil with a brush.
•
Replace the head assembly.
,
WASHABLE CLEANING
•
Ensure the shaver is switched off and unplugged from the mains.
•
Pull the foil assembly up to remove from the hair pocket.
•
Foils – do not use the brush to clean the foils. Instead, rinse the foils under
cold or warm water.
•
Cutters and Trimmers – Rinse any loose hairs away in cold or warm water.
Do not use hot water.
•
After cleaning, replace the head assembly.
•
Do not submerge in water as damage will occur.
,
CLEANING TRIMMER
•
Lubricate the teeth of the trimmer every six months with a drop of sewing
machine oil.