Emptying Hair Chamber:
1. Turn off the unit.
2. Hold the unit from the back end of unit, cradling the bottom with one hand.
3. Push the chamber release button with your gripping hand thumb and with your
other hand rotate and then lift the chamber off.
4. To empty contents grip the chamber securely in hand with opening facing down
over desired collection container. Shake chamber up and down, but stopping
rapidly on the down stroke. This may have to be repeated several times.
5. You may have to vigorously shake the chamber or scoop out some of the
compacted hair clippings.
6. Be careful not to puncture the screens on the hair chamber while emptying the unit.
7. The mesh side of the vacuum chamber can be opened to aid in hair removal and
cleaning of the mesh.
The mesh can be brushed or rinsed under water to be cleaned; however it needs to
be completely dry before it is reattached to the unit.
8. Once finished emptying, place the chamber back onto the unit by putting the scoop
end in first and then gently rotating the mesh end back into place until it clicks.
Longer Styles
• For optimum performance do not trim hair 18mm or longer with one pass of the
clipper.
• When cutting hair 18mm or longer use a finger on your free hand in between the
comb and clipper to guide hair into the blade by applying slight pressure. As you
move the clipper up to cut, your finger will help keep the longer hairs from slipping
away before they can be cut. If the hair extends well past the hair collection
chamber opening, place your finger on top of the chamber near the opening.
Short Tapered Styles – “Flat Tops” and Short Cuts
• Starting with the longest guide comb attached (25mm),
cut from the back of the neck to the crown. Hold the guide
comb flat against the head and slowly move the clipper
through the hair.
• Use the same procedure from the lower side to the upper
side of the head.
• Then cut the hair against the direction in which it grows and
level with the sides.
• To give a “flat top” look, the hair on top of the head must be cut over the top of a
flat comb.
• Use a closer guide comb to taper the hair down to the neckline as desired.
Cleaning and Maintenance
Troubleshooting
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
material or workmanship for a two-year period from the original date of consumer
purchase. This warranty does not include damage to the product resulting from
accident or misuse. If the product should become defective within the warranty
period, we will replace it free of charge. Return your product and sales receipt with
your name, address and day time phone number to:
Remington Returns Center, 507
Stokely Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-4648
in the U.S. or Canada.
Warranty excludes: Storage pouch
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products damaged by the following:
■
Accident, misuse, abuse or alteration of the product
■
Servicing by unauthorized persons
■
Use with unauthorized accessories
■
Connecting it to incorrect current and voltage
■
Wrapping cord around appliance causing premature wear and breakage
■
Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or mainte-
nance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THIS PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE
LIMITED IN DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indicat-
ing purchase price and date of purchase to the retailer from whom it was pur-
chased. Spectrum Brands, Inc. will reimburse all retailers who accept the product
within 30 days from the date of purchase. If you have any questions concerning
the money-back guarantee, please call 800-736-4648 in the U.S. or Canada.
Warranty
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call
800-736-4648 in the U.S. or Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1.
Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2.
The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3.
In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4.
Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5.
Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6.
No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7.
Please allow 4–6 weeks to receive your refund by check.
Questions or comments:
Call 800-736-4648 in the U.S.
or Canada or visit
RemingtonProducts.com.
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
® Registered Trademark of Spectrum Brands, Inc.
© 2017 Spectrum Brands, Inc. 2/17 17108-00
Made in China.
T22-0004538-A
1) Press to release.
Mesh Release Tab
2) Then, Grip/Push to
swing mesh open.
Mesh is hinged to swing
open and closed.
Clipper cutters do not move:
■
The cutting unit may be dirty and clogged. Clean the unit as directed in Cleaning
and Maintenance section.
Vacuum not functioning properly:
■
Ensure that the chamber has been emptied and correctly placed back into
the unit.
■
Check for obstructions in the inlet and air flow path.
Fan chamber clogged up:
■
Remove the hair chamber.
■
Using the cleaning brush that has been provided, gently brush between the
protective exhaust vents. If necessary, blow into the fan chamber. Hair clippings
should become loose and fall out.
Cleaning and Maintaining Your Clipper
After each use:
■
Brush the accumulated hair from the cutters.
■
Rinse blade.
Rinsing your blades
- Turn off clipper and detach blades. Rinse the inside of the blades.
- Ensure all loose hairs are removed from the blades.
- Once blades are cleaned, ensure the blades and unit are thoroughly
wiped dry.
Caution:
Do not rinse the clipper. Only rinse the blades.
■
Place a few drops of clipper oil onto the blades gliding surface. Wipe off
excess oil.
Every Six Months
■
At regular intervals the blade set should be removed and cleaned.
■
Brush out hairs from between the blades with soft cleaning brush. Do not
remove the lubricating grease on the plastic components. It is not necessary
to remove the small moving blade from the unit.
■
Place a few drops of clipper oil onto the blades gliding surface. Wipe off
excess oil.
Cleaning Cautions:
■
Do not use liquid cleaners on the cutters or harsh or corrosive chemicals on the
cutter casing.
■
Unplug the clipper from the power outlet when not in use and when cleaning.
Storage
■
Always store this appliance and cord in a moisture-free area.
■
Do not wrap the cord around the appliance.
■
Do not store in temperatures above 140ºF.
Blades
■
It is recommended to oil the blades after every use.
■
Place 2 to 3 drops of lubricating oil on the moving blade and turn on the
clipper. The oil should distribute on its own. Wipe off any excess oils.