XR1450
Use and Care Guide
Register Your New Product Today!
By registering your new Remington
®
product, you will receive these important benefits:
Proof of Ownership Product Protection Product Registration Special Offers
Register online at: www.RemingtonProducts.com
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance, basic precautions should always be observed,
including the following.
Please read all instructions before using this shaver.
WARNINGS
To reduce the risk of burns, fire, electric shock, or injury to persons:
• When connecting the charging unit to a power source outside of the USA or
Canada, use a plug adapter suitable for the power outlet. This device has a charg-
ing adapter that will work with worldwide 100V-240V power outlets.
• Only use the power adapter provided with this device.
• Do not reach for the appliance if it has fallen into water while plugged into the
power source. Unplug from the power source at the wall immediately.
• Shaver may be rinsed under water or used in the shower, but never use the
charging unit in the shower.
• Detach the shaver and charging unit from the power source before cleaning.
• This appliance should not be left unattended while plugged in, except when
recharging.
• Always unplug this appliance after using, except when recharging.
• When recharging place in a safe position, out of the reach of children and pets.
• Close supervision is necessary when this appliance is used by, on, or near children
or individuals with certain disabilities or special needs.
• Use this appliance only for its intended use as described in this manual.
• Do not use attachments not recommended or provided by the supplier.
• Never operate this appliance if the electrical cord is frayed or the plug is damaged.
• Keep the electrical cord away from heated surfaces.
• Never drop or insert objects into any of the appliances openings.
• This appliance is intended for household use only.
• Do not use outdoors, or operate where aerosol (spray) products are being used, or
where oxygen is being administered.
• Always attach the plug to the appliance, then to the wall outlet.
• To disconnect, turn all controls to off, then remove plug from outlet.
• Always pull on the plug body to unplug the device from the wall socket. Never pull
on the electrical cord.
• Do not plug in or unplug this appliance when your hands are wet.
• Do not use extension cords or a voltage converter with this appliance.
• Do not wrap the power cord around the appliance to prevent breaking the cord.
• Always store the appliance and charger in low moisture area.
• Do not expose the appliance to temperatures over 140° F (60° C).
• Detach removable power cords from the appliance during storage.
• Do not use this shaver if the cutting head surfaces are damaged or broken as
facial injury could occur.
• This shaver and trimmer are intended for use on facial hair only. It should not be
used for longer hair on your head or body.
Product Features
SHAVER PARTS
1.
Hyperflex cutting head
2.
Full floating heads
3.
Power on/off button
4.
Battery Indicator display
5.
Pop-up detail trimmer
6.
Charging pins
7.
Charging Stand
8.
Charging adapter
2
1
3
6
7
Charging
Charging Process
1. Plug the power cord adapter into the charging stand.
Unfold the charging stand into the open position. Plug the cord into the port
at the side of the charging stand. The plug has a custom shape to match the
charge stand and prevent use with incorrect adapters. (A)
2. Plug the adapter into the wall outlet.
Place the stand on a flat surface and where it cannot be accidently bumped into
standing water such as a sink or bathtub.
3. Place the shaver into the charge stand.
Position the shaver body so the charging pins of the shaver mate with the
charging strips in the charge stand. (B) Note the LED battery display will indicate
that the battery is actively charging as noted in the LED indicator section of this
manual.
4. Use the shaver until a recharge is required.
Do not leave the charger plugged in so that you are recharging the shaver after
every use. This will shorten the life of the battery. To use the charge stand to
hold the shaver on your counter between uses, simply unplug the adapter cord
from the charge stand and store it away until a recharge is needed.
Quick Charge Feature
• The shaver does not need to be fully charged to function. The quick charge allows
you to place the shaver on charge for 5 minutes and will deliver up to 5 minutes
of use – approximately one or two shaves.
A
B
4
5
Use with gel or foam in
the shower for ultimate comfort.
SAVE THESE INSTRUCTIONS
HYPERFLEX
8
Hyperflex Cutting Head
• Cutting head pivots and flexes to comfortably follow the contour of your face.
Full Floating Heads
• Each head independently flexes to react to facial contours.
Dual Track Cutters
• Three rotary cutters with two cutting tracks for fast, efficient shaves.
Lithium Battery
•Durable, long lasting power supply. 3X longer life than standard rechargeable cells.
60 minute run time
• Weeks of daily shaving on a single charge.
90 minute charge time
• Fast delivery of a full battery charge.
Quick charge
• A five minute charge will provide battery life for up to 2 shaves.
Waterproof
• Use dry or with shaving gel. Safe to use shaver in the shower for added comfort.
• Fast, simple cleaning under the faucet.
Worldwide voltage
• Provided charging adapter works with 100V to 240V power source.
Folding charge stand
• Rotate open to hold shaver while charging. Collapses down around shaver for
travel or storage.
Performance Features
LED lights display the battery charge level.
The shaver has eight red LED lights in the shape of a circular fuel gauge.
• Full Charge: All eight LED lights will glow solid red to indicate the shaver has
a full charge. As the shaver discharges, single lights will turn off sequentially
in a counterclockwise direction to indicate the percentage of charge remaining.
• Low Charge: When less than 10% of the charge life is remaining, the last red
LED light will flash on and off to indicate the shaver needs to be recharged.
• Charging: When placed in the plugged in charge stand, single red LED lights
will flash sequentially in a clockwise direction around the fuel gauge. This
indicates the shaver is taking a charge. At full-charge all the LED lights will be
off to indicate the battery is full.
Your Hyperflex shaver may be used either dry or wet with shaving cream or gel.
We recommend that you use the shaver in the shower for optimal performance.
Wet Shaving
• Wet shaving will provide a very comfortable and close shave. The shaver is safe to
use in the shower or can be rinsed under running water at the sink.
• Wet your face and neck area with water.
• Apply shave gel or foam to your face.
• Press the power button to turn the shaver on then rinse the cutting head under
running water.
• Place the shaver cutting head against your skin with all three cutters touching
your skin.
• Pressing lightly against your skin, move the shaver head in slow, small
circular motions.
• Hairs on your face and neck may grow in different directions. Moving your shaver
against the direction of hair growth will be most effective.
• You may use your free hand to gently stretch your skin tight which can aid in mak-
ing hairs stand up to more easily enter the cutting slots.
• To trim sideburns or edges of goatees or beards, press the pop-up trimmer release
button to activate the trimmer. Place the trimmer blade parallel with your skin and
use downward strokes to cut.
LED Battery Indicators
Shaving Technique
