background image

11

Turn the hygrostat’s 
rotary knob 
anticlockwise 
into the 
“OFF” position. 

If the units are 
inactive for longer 
periods, disconnect 
them from the mains 
power supply.

Empty the condensate container 
completely and dry with a clean 
cloth.  

Beware of dripping condensate!

 

The units must be cleaned and 
dried completely before storing.

When storing the unit, cover with 
a plastic sheet/foil if necessary 
and store in an upright position in 
a sheltered and dry location.

The units are only permitted to be 
stored upright in a suitable storage 
location that is protected against 
dust and direct sunlight. 

Continuous operation with 
external condensate outlet

 

The units are equipped with 
a special connection nozzle on the 
left side. 
A standard 1/2” water hose can 
be connected to this. 

1.  To do this, use a suitable tool 

to break the cover [F] out of the 
side wall.  

Only

 

required for the first 

connection!

 

2.  Connect a sufficiently long 

and suitable drain hose to the 
connection nozzle that is now 
exposed. 

In unattended permanent 
operating mode, the condensate 
should preferably be drained into 
a lower-level drain.  
If using an external collection 
container (pan, bucket, etc.), 
the unit must be placed 
at a correct height.

Shutdown

F

Emptying the condensate 
container

The integrated condensate 
container must be emptied from 
time to time. 

Dehumidification mode is switched 
off if the condensate container is 
full. 
The “Container full” indicator light 
indicates that the unit has switched 
off. 

1.  Pull the full container forwards 

and out carefully. 

2.  Pour the water into a drain.

3.  Re-insert the emptied container 

carefully into the unit. 

The “Container full” indicator light 
extinguishes and the unit 
continues to run automatically. 

NOTE

The unit can only be started 
once the condensate container 
has been inserted correctly.

NOTE

After being emptied, the 
condensate container incl. 
float must be checked for 
damage, contamination etc. 

There is no unit overflow 
protection in this variant.

 

!

   CAUTION

Ensure that the drainage hose 
is placed at an incline to the 
drain to allow the condensate 
to drain without hindrance! 

 

!

   CAUTION

Summary of Contents for ETF 320





















Reviews: