background image

15

Because of their means of design 
and construction, the devices are 
solely suitable for heating and 
ventilation purposes in industrial 
or commercial premises (not room 
heating on private premises). 
The devices must be exclusively 
serviced by appropriately trained 
staff. 

In the case on non-observance of 
the manufacturer‘s instructions, 
the local legal specifications in re-
spect of set-up the device or inde-
pendently performed modifications 
to the equipment the manufacture 
assumes no liability for possible 
damage caused.

Customer Service and 
Guarantee

Environment Pro- 
tection and Recycling

Disposal of packaging

When disposing of packaging 
material, please consider the 
environment. Our equipment 
is packed carefully for transport 
and supplied in stable cardboard 
packaging on  a wooden palette if 
required. The packaging materials 
are environmentally friendly and 
can be reused. With the reuse of 
packaging material, you make a 
valuable contribution to the reduc-
tion of waste and the preservation 
of raw materials.

You should thus dispose of the 
packaging material at the corres-
ponding disposal sites. 

Disposal of the old device

  

Manufacture of our equipment is 
subject to constant quality control.

Only high-quality materials that 
are recyclable to a great extent are 
used.

You also contribute to environ-
mental protection by guaranteeing 
that your old device is disposed 
of in an environmentally friendly 
manner.

For this reason, bring the old 
device only to an authorised recy-
cling company or to a correspon-
ding disposal site.

A prerequisite for possible claims 
under guarantee is that the custo-
mer/his supplier have returned the 

guarantee certificate

“ enclosed 

with the device promptly after 
purchasing the unit and putting it 
into operation to REMKO GmbH & 
Co KG. 

The device was tested several 
times at the factory for perfect 
function.  
If any malfunctions should occur, 
however, which cannot be elimina-
ted by trouble shooting measures 
performed by the operator, please 
consult your dealer or contract 
partner.

Proper use

Any other operation other 
than that described in these 
operating instructions is not 
permitted. 
Non observance renders all 
claims for liability and guaran-
tees null and void.

NOTE

Adjustment and maintenance 
tasks may be performed only 
by authorised expert personnel.

NOTE

Summary of Contents for HTL 400





















Reviews: