4
HIGH-PERFORMANCE FANS
Safety notices
Description of the unit
NOTE
Only authorised electricians
may extend the connecting
cable, taking into account the
rating of the unit, cable length
and local use.
The units were subjected to ex-
tensive material, functional and
quality inspections and tests prior
to delivery.
The units can however constitute
a hazard if used improperly by
untrained persons or not for the
intended purpose.
Always observe the following
safety information:
■
The locally applicable building
and other regulations must be
observed.
■
The operator is responsible for
correct installation of the units,
correct electrical installation and
safe operation of the units.
■
The units must always be set up
and operating in a stable man-
ner.
■
The units may be set up and
operated only in an environment
not at risk of fire or explosion.
■
The units must not be set up
and operated in aggressive envi-
ronments.
■
Protect the environment and
yourself from any flying parts.
■
Safety components such as
protection grids must be neither
dismantled nor decommissioned.
■
The units must only be operated
within the specified capacity
limits.
■
The air inlets including grilles
must be kept free of dirt and
loose objects at all times.
■
The air inlet and outlet must not
be closed.
■
Never insert foreign objects into
the device.
■
The unit must not be subjected
to a direct jet of water.
■
Never allow water to enter the
unit.
■
All electric cables of the units
must be protected against dam-
age e.g. by animals, etc.
■
The unit musst not be transport-
ed during operation.
■
People who use the unit must
be familiar with the risks arising
with the use of conveying fans.
■
Use hearing protection when
in the vicinity of the unit for a
longer period of time.
The combination of a powerful ra-
dial fan and thoroughly conceived
accessories
(RTV 30 only)
makes
the unit into a particularly versatile
solution for air circulation.
Due to its specially adapted air
guidance function, the turbo fan
generates a wide airflow close
to the floor over wet flooring or
moist screen. This airflow optimally
distributes the room air and thus
noticeably increases the drying
speed.
But even in the case of supported
wall and floor drying after water
damage or as an aid in the dry-
ing of screed and buildings under
construction, the units can render
valuable services.
Through the connection of tubes
(RTV 30 only), particularly targeted
ventilation or drying of hollow
spaces is possible.
The units are also ideal for the
effective support of dehumidifiers
in the drying of buildings under
construction.
Depending on the respective envi-
ronment and temperature, the dry-
ing time can be drastically reduced
by the combination of dehumidifi-
ers and the high-performance fan.
The units can be adjusted in three
different mounting angles (0°, 45°,
and 90°).
When high-performance fans
are used, people must be
aware of any risks that arise.
ATTENTION
!
Summary of Contents for RTV 15
Page 2: ...2 ...