29.
To continue installation, place the next ring
element on the elements that have already
been installed.
Fig. 34
30.
The third ring element must rest completely
on the element below.
Fig. 35
31.
Always place each additional ring element
completely on the bottom element until you
only have the cover left. The REMKO WKF
70 heat pump includes four ring elements,
the WKF 120 unit series contains five ring
elements and the WKF 180 unit series con-
tains seven ring elements.
Fig. 36
32.
After installing the ring elements, the alumi-
nium frame can still be seen at the top edge.
To install the top cover, you must screw the
four M6 x 120 mm threaded rods supplied
into the corresponding M6 threaded sleeves.
Fig. 37
27
