23
The units are designed exclusively
for heating and ventilation pur-
poses in industrial or commercial
use (not for living space heating in
private use) on the basis of their
structural design and equipment.
The unit design allows the use of
air ducts on the intake and outlet
side or unit accessories with the
appropriate fan and motor design.
In the standard version, the units
are not designed for exclusive use
as supply air units.
The units must only be operated
by appropriately instructed person-
nel.
A failure to observe the manufac-
turer's specifications, the respec-
tive local legal requirements or
arbitrary alterations to the units,
exempts the manufacturer from
liability for resulting damage.
Customer service and
guarantee
As a prerequisite for any guarantee
claims to be considered, it is essen-
tial that the ordering party or their
representative complete and return
the
“Certificate of guarantee”
to
REMKO GmbH & Co. KG at the
time when the units are purchased
and commissioned.
The units have been tested several
times in the factory to verify their
correct function.
However, if malfunctions should
arise that cannot be remedied by
the operator with the assistance of
the troubleshooting section, please
contact your specialist dealer or
contractual partner.
Intended use
Disposal of packaging
When disposing of packaging mate-
rial, please consider our environment.
Our units are carefully packed and
delivered in stable transport packag-
ing and, if applicable, on a wooden
pallet.
The packaging materials are
environmentally-friendly and can
be recycled.
By recycling packaging materials,
you make a valuable contribution
to the reduction of waste and
conservation of raw materials.
Therefore, only dispose of
packaging material at appropriate
collection points.
Disposal of the old unit
The manufacturing process for
the units is subject to continuous
quality control.
Only high-grade materials are
processed, the majority of which
are recyclable.
You also contribute to environ-
mental protection by ensuring
that your old equipment is only
disposed of in an environment
friendly manner.
Therefore, only bring the old
unit to an authorised recycling
business or to an appropriate
collection point
.
NOTE
Operation that differs from
that specified in this operating
manual is prohibited.
Failing to observe this renders
any manufacturer liability or
guarantee claims void.
NOTE
Adjustment and maintenance
work may only be carried out
by authorised specialist per-
sonnel.
Environmental
protection and
recycling
CAUTION
Copyright
Redistribution, even in part, or
use of this documentation for
purposes other than intended
without the written authorisa-
tion of
REMKO GmbH & Co. KG
!
