Remo Racing – Kosmic Owner’s Knowledge Packet –
www.kosmickartaustralia.com
17 |
P a g e
12d. Brake Bleeding
When bleeding your make sure have the proper OTK brake bleed kit (PN 0156.00).
This tool enables for and effective and efficient job. Here are the steps required.
1. Take a 5mm Allen wrench and remove the braking pumps discharge plug
2. Insert your OTK Bleeding Kit; carefully begin screwing it into the fitting.
3. Once secure, remove the top cap on the Bleeding Kit and turn the valve to the ‘On’ Position’
4. Now, move to the rear calliper and underneath the bleeding screws place a rag (in order to absorb
any residue and spillage).
5. Once complete remove bleeding screw and let the bleeding kit force all the air out of the brake line
6. Once the air appears to be gone, insert the bleeding screw.
7. Repeat this step for each brake pump on the chassis
8. When finished make sure that you have securely tightened the discharge plugs.
(Pic #1) 3mm Allen
(Pic #2) 8mm Wrench
(Pic #3) 8mm Wrench
(Above) Pump’s Discharge Plug (5mm Allen)
