Please test the four remote controls from out side with leaving the key body inside before installation.
Check the door condition (material, shape and surface)
If the door has an unsmooth surface or its paint peels and if it is a wood door, we cannot guarantee your
security after installation. (In that case, please consult with the dealer)
■ Measurement for installation location.
Check if the lock can fit into the door and its frame.
■ Cleaning the installation place.
Wipe off the dust or moisture on the installation place with alcohol.
(Impurities will undermine adhesion)
■ Inserting busing in the hole of latch.
Install the lock after inserting assistant busing in the hole of latch and combining the body with the completed latch.
■ Notice for the attachment/detachment of the body.
Be careful not let the lock body fall from the installation place to prevent human injury and damage of the lock.
■ Automatic opening
There is function that in case of incomplete installation or operation failure, the lock will be opened
automatically, with warning sound.
Tape can not be re-used.
This tape can not be used once it is attached. So, attach it after reading the installation method enough.
Caution
Establishment common sense
