ron ron
REMS Cento
REMS Cento RF
REMS Akku-Cento 22 V
REMS DueCento
REMS Herkules 3B, suport de material cu 3 picioare
120120
120120
120120
REMS Herkules Y, suport de material cu dispozitiv de blocare
120130
120130
120130
REMS Herkules XL 12"
120125
120125
120125
Suport țeavă 1, reglabil pe înălțime, Ø 40 – 110 mm, Ø 1½ – 4" 845220
845220
Suport țeavă 1, reglabil pe înălțime, Ø 100 – 225 mm, Ø 4 – 8"
845220
Suport țeavă 2, reglabil pe înălțime, Ø 40 – 110 mm, Ø 1½ – 4"
845230
REMS Jumbo E, banc de lucru rabatabil
120240
120240
120240
REMS Jumbo, banc de lucru rabatabil
120200
120200
120200
REMS REG 10 – 54 E, dispozitiv de debavurat ţevi, interior/exterior
113835
113835
113835
REMS REG 28 – 108, dispozitiv de debavurat ţevi, interior
113840
113840
Aparat de marcat pentru marcarea adâncimii de inserție a fi tingurilor pe țevi 845530
845530
REMS CleanM, soluţie de curăţat maşini
140119
140119
140119 140119
1.3. Domeniu de lucru
Ţevi de inox, cupru şi materiale compozite,
Ţevi din oţel carbon din sisteme de fi tinguri de presare
Ø 8 – 108 mm
Ø 8 – 108 mm
Ø 54 – 225 mm
Ţevi oţel EN 10255 (DIN 2440)
DN 6 – 100
DN 6 – 100
DN 50 – 150
Ø
⅛ – 4"
Ø ⅛ – 4"
1½" – 6"
Ø 10 – 115 mm
Ø 10 – 115 mm
Ø 14 – 115 mm
Ţevi fontă (SML) EN 877 (DIN 19522)
DN 40 – 100 mm
DN 50 – 100 mm
DN 50 – 200 mm
Ţevi plastic SDR 11
Ø 10 – 110 mm
Ø 10 – 110 mm
Ø 40 – 225 mm
Ø ⅛ – 4"
Ø ⅛ – 4"
Ø 1¼ – 8"
Țevi de racordare
Ø 10 – 110 mm
Ø 10 – 110 mm
Ø 40 – 110 mm
Țevi de evacuare / burlane sudate, din oțel inoxidabil (EN 1124)
Ø 40 – 110 mm
Grosime perete ţevi oţel, cupru, fontă (SML)
≤ 4,5 mm
≤ 4,5 mm
≤ 5,0 mm
Grosime perete ţevi plastic/mat. compozite
≤ 10,0 mm
≤ 10,0 mm
≤ 21,0 mm
Temperaturi de lucru
REMS mașină de tăiat țevi,
REMS mașină de tăiat țevi cu acumulator
-10 °C – +60 °C (14 °F – 140 °F)
Acumulator
-10 °C – +60 °C (14 °F – 140 °F)
Încărcător rapid
0 °C – +40 °C (32 °F – 113 °F)
1.4. Turaţie
Turaţie disc de debitare mers în gol
115 rot/min
115 rot/min
84 rot/min
115 rot/min
1.5. Specifi caţii electrice
REMS Cento, REMS Cento RF,
REMS Due-Cento
230 V ~; 50 – 60 Hz; 1200 W; 5,7 A. siguranţă (reţea) 10 A (B), regim ruperi S3 20% (AB 2/10 min), izolaţie de protecţie, deparazitat, sau
110 V ~; 50 – 60 Hz; 1200 W; 11,4 A. siguranţă (reţea) 20 A, regim ruperi S3 20% (AB 2/10 min), izolaţie de protecţie, deparazitat, sau
REMS Akku-Cento 22 V:
21,6 V ; 5,0 Ah / 21,6 V ; 9,0 Ah.
Încărcător rapid Li-Ion:
Input: 100 V – 240 V ~; 50 – 60 Hz; 90 W, Output: 21,6 V –
---, izolare de protecţie, deparazitat.
1.6. Dimensiuni
REMS Cento
REMS Cento RF
REMS Akku-Cento 22 V
REMS DueCento
L× L × H:
250×300×250 mm 250×300×250 mm
250×330×460 mm
260×430×515 mm
(10"×12"×14") (10"×12"×14") (9,8"×13,0"×18,1") (10,2"×16,9"×20,3")
1.7. Greutate
fără pedală de siguranţă (fără acumulator)
16,8 kg (37 lb)
16,8 kg (37 lb)
16,0 kg (35 lb)
37,0 kg (82 lb)
REMS Acumulator Li-Ion 21,6 V, 5,0 Ah
0,8 kg (1,8 lb)
REMS Acumulator Li-Ion 21,6 V, 9,0 Ah
1,1 kg (2,4 lb)
1.8. Informaţii privind zgomotul produs
Nivel de presiune acustică
L
pA
= 87 dB (A)
L
pA
pA
pA
= 87 dB (A)
pA
pA
L
pA
= 87 dB (A) L
pA
= 87 dB (A)
pA
pA
Nivel de putere acustică
L
wa
= 98 dB (A)
L
wa
= 98 dB (A)
L
wa
= 98 dB (A)
L
wa
= 98 dB (A)
Nivel de presiune acustică
L
pc peak
= 100 dB (A) L
pc peak
= 100 dB (A)
L
pc peak
= 100 dB (A) L
pc peak
= 100 dB (A)
K = 3 dB (A)
K = 3 dB (A)
K = 3 dB (A)
K = 3 dB (A)
1.9. Vibraţii
Acceleraţie efectivă ponderată
< 2,5 m/s²
< 2,5 m/s²
< 2,5 m/s²
< 2,5 m/s²
K = 1,5 m/s²
K = 1,5 m/s²
K = 1,5 m/s²
K = 1,5 m/s²
Vibraţiile menţionate au fost măsurate cu o metodă de control standard, putând fi folosite ca valori comparative cu alte aparate. Vibraţiile menţionate se pot folosi şi
la o primă analiză a regimului de rupere.
ATENŢIE
ATENŢIE
Vibraţiile date pot diferi de cele apărute în timpul folosirii maşinii, acestea depinzând de modul în care maşina de debitat ţevi este utilizată. În funcţie de condiţiile reale
de funcţionare (regim de rupere), unitatea va trebui să ia eventual măsuri de siguranţă pentru protecţia utilizatorului.
2. Punerea în funcţiune
ATENŢIE
ATENŢIE
Greutăţile de transport de peste 35 kg vor trebui trase de cel puţin 2 persoane.
2.1. Conectarea la reţea
AVERTIZARE
AVERTIZARE
Atenţie la tensiunea de reţea!
Înainte de a conecta la reţea maşina de tăiat
țevi, resp. încărcătorul rapid, se va verifi ca dacă tensiunea din reţea corespunde
cu cea de pe plăcuţa de fabricaţie. Pe şantiere, în medii umede, în interior sau
în aer liber, respectiv în alte locuri similare, maşina de debitat țevi se va conecta
la reţea numai cu ajutorul unui întreruptor de protecţie la curenţi reziduali
(întreruptor FI), care să poată întrerupe alimentarea cu curent electric în
momentul în care intensitatea curentului de legare la pământ depăşeşte timp
de 200 ms, valoarea de 30 mA.
Acumulatoarele (Fig. 1 (19))
Descărcarea completă din cauza tensiunilor mici
Tensiunea la acumulatoarele Li-Ion nu trebuie să scadă sub limita minimă, în
caz contrar acumulatorul se poate defecta din cauza „descărcării complete”,
consultați indicatorul gradat de încărcare acumulator. Celulele acumulatoa-
relor REMS Li-Ion sunt preîncărcate din fabrică la cca. 40 %. Din acest motiv,
acumulatoarele Li-Ion vor trebui încărcate înainte de folosire și apoi reîncărcate
periodic. Dacă această instrucțiune a producătorului de celule nu este respec-
tată, este posibil ca acumulatorul Li-Ion să se deterioreze din cauza descărcării
complete.
Descărcarea completă în timpul depozitării
În cazul în care un acumulator Li-Ion încărcat relativ puțin este pus în depozit,
acesta se poate descărca automat complet și, prin urmare, se poate defecta.
De aceea, acumulatoarele Li-Ion se vor încărca complet înainte de depozitare
și se vor reîncărca apoi la interval de șase luni, resp. se vor încărca complet
înainte de a fi reutilizate.
115