background image

                                                                            

18

 

 

5. Warranty 

The standard warranty period for the inverter is 60 months from the date of installation and no more than 66 
months (5.5 years) from the date of shipment from factory.  

5.1 Warranty claim procedure                                                 

Please report defective device with a brief error description and SN code to our service mail or service hotline 

for registration.  

Alternatively, please contact your specific dealer or installer if your unit is defective or faulty. 

To claim the warranty under the warranty terms of factory, you need to supply us with the following information 

and documentation regarding the faulty unit:   

1)  Product Model No ( e.g. NAC-8K-DS) and the serial Number (e.g. 8000831190511006). 

2)  Copy of the invoice and warranty certificate for the inverter. 

3)  Error message on LCD screen and additional information regarding the fault/error. 

4)  Detailed information about the entire system (modules, circuits, etc.). 

5)  Documentation of previous claim/exchanges ( if applicable). 

In the case of an exchange, the remainder of the warranty entitlement will be transferred to the replacement 
device. In this event, you will not receive a new certificate, as this replacement will be noted by factory. 

 

5.2 Service after warranty expiration                                             

For products which are out of warranty, factory charges an on-site service fee, parts, labor cost and logistic fee 
to end-user which can be any/all of: 

 

1)  On-site attendance fee: Cost of travel and time for the technician in attending on-site; 
2)  Parts: Cost of replacement parts (including any shipping/admin fee that may apply); 
3)  Labor: Labor time fee charged for the technician, who is repairing, maintaining, and installing (hardware 

or software) and debugging the faulty product; 

4)  Logistic  fee:  Cost  of  delivery,  tariff  and  other  derived  expense  when  defective  products  are  sent  from 

user to factory or/and repaired products are sent from factory to user; 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

Summary of Contents for NAC4K-DS






















Reviews: