background image

4

The Smart Kitchen Timer features a durable 1280×480 display along with an incredibly 
fast quad-core ARM Cortex A-7 microprocessor. As a result, the SKT offers superior 
display  capabilities  when  compared  to  our  competitors.  Configurable  in  either 
horizontal or vertical orientation, the SKT is an extremely versatile food service timer 
which can be mounted and used in many different areas of the kitchen. These areas 
include the grill, retherm station, fryer, hot/cold holding bins and prep table. What’s 
more, the SKT can even be used for front of house tasks! Mounting the unit is simple 
with the included bracket. The Smart Kitchen Timer can also be embedded in various 
pieces of equipment and areas of the kitchen.

When in Holding Mode, each screen displays 9 items in horizontal orientation and 
up to  8  in vertical  orientation. When  in  Cook  Mode, the  left  panel  displays  up to  4 
items and up to 12 active timers on the right panel. In both modes you can scroll 
through items, with up to 1000 programmable items total per unit. Use the timer as 
a standalone or connect up to 7 additional units for added functionality such as the 
ability to transfer items from a cook timer to a hold timer. Chiefly, with the ability to 
wirelessly program the SKT through PC or laptop the customization, adaptability, and 
value provided are unrivaled.

Looking to monitor temperature or humidity as well? Pair a Gateway and up to 20 
Wireless  Sensor  Modules  for  the  ultimate  freshness  timer!  Furthermore,  when 
connected to the Renau Cloud the SKT interfaces with our Smart Kitchen System 
allowing it to be monitored and programmed remotely from anywhere in the world 
with a Wi-Fi connection!

Are you ready to start building your very own connected kitchen? Our sleek 6.8″ Smart 
Kitchen Timer provides a much needed alternative to the big, unruly, and expensive 
eyesores that have become so common in the kitchen. Bring your kitchen into the 
future with Renau’s T-2268 Smart Kitchen Timer!

•  Durable and glove safe 6.8” touch screen
•  Compatible with Renau’s Wireless Sensor Modules
•  Multi-language support
•  Simple wireless configuration
•  Customizable action messages
•  Configurable task reminders
•  Extensive library of icons with the ability to upload your own
•  Transfer items between cook and hold timers
•  Customizable day parts
•  Configurable in vertical and horizontal orientation
•  Job aids
•  Use as a standalone unit or connect up to 7 additional SKTs
•  And much more!

Renau’s T-2268 6.8” touchscreen cook/hold Smart Kitchen Timer (SKT) 

gives food service operators total oversight of their operations while 
guaranteeing freshness and consistency to their customers.

Features Include: 

About the SKT

Summary of Contents for SKT T-2268























Reviews: