parking distance control........................(up to the end of the DU)
driving ...................................................(up to the end of the DU)
reversing sensor ...................................(up to the end of the DU)
2.30
ENG_UD12913_2
Aide au parking (X95 - J95 - R95 - Renault)
ENG_NU_840-2_JR95_Renault_2
Jaune
Noir
Noir texte
Parking sensor
PARkING DISTANCE CONTROL
(1/3)
Operating principle
Ultrasonic detectors, installed in the
front or rear bumper depending on the
vehicle, measure the distance between
the vehicle and an obstacle whilst re-
versing.
This measurement is indicated by
beeps which become more frequent the
closer you come to the obstacle, until
they become a continuous beep when
the vehicle is approximately 30 centi-
metres from the obstacle.
Note:
display
1
shows the vehicle sur-
roundings using beeps.
This function is an additional aid that indicates the distance between the
vehicle and an obstacle whilst reversing, using sound signals.
Under no circumstances should it replace the driver’s care or responsibil-
ity whilst reversing.
The driver should always look out for sudden hazards during driving: always
ensure that there are no moving obstacles (such as a child, animal, pram or bi-
cycle, etc.) or small, narrow objects such as stones or posts in your path when
manoeuvring.
Rear parking distance control
Operation
When reverse gear is selected, most
objects which are less than approxi-
mately 1.20 metres from the rear of the
vehicle are detected, a beep sounds
and, depending on the vehicle, dis-
play
1
lights up.
Automatic deactivation of the rear
parking distance control
The system deactivates:
– when the vehicle speed is above ap-
proximately 6 mph (10 km/h);
– when reverse gear is disengaged.
1
