Page | 7
CAUTION:
battery must be fully charged before you can operate your scooter.
·
Use only the charger supplied with the unit. If the battery is damaged, replace it with an official charger.
·
The average charging time of the battery is between
2 and 4 hours (depending on the model)
. When the scooter is not used regularly,
consider recharging it at least once a month. Failure to charge for a long period of time may affect the battery's autonomy and life.
Brake
Check that the brake is working properly. When you apply the brake, it must provide good braking.
Frame, Fork and Handlebar
Regularly check the general condition of the scooter, such as cracks or defective connections. Although it is rare for the chassis to
break, it is possible to hit a sidewalk or wall and bend or break the chassis when used too aggressively.
Tires
Inspect the wheels periodically for excessive wear or punctures.
Charging the battery
Maintenance and servicing
1.
Make sure the on/off switch is in the
"off" position, then insert the charger tip
into the scooter charging connector
located under the plastic cap.
2.
Plug the mains charger into an
electrical outlet, a light comes on:
- Red light = the battery is charging
- Green light = battery is fully charged
1.
Lift the locking lever that connects the handlebar to the
hook on the rear mudguard.
2.
Once released, raise the main bar to its initial position.
3.
Raise the front locking lever, and then secure it by
turning the locking ring to the left.
4.
Before first use, check the tightness of the main screw
of the folding system and adjust it using the Allen key
provided.
