31
POWER INVERTER/CHARGER
The inverter/charger is a dual function device. The
inverter portion of this device converts 12VDC
to 120-VAC. The inverter draws power from your RV
12-volt DC coach batteries and electronically converts
the DC current into standard 120-VAC AC current. This
allows you to use electricity to run certain 120- VAC
electrical appliances while not plugged into shore power
or from the generator. You need to monitor the battery
when dry camping, or have the Automatic Generator
Start enabled. You should not let the battery be drawn
down more than 11.4 volts before plugging the shore cord
in or starting the generator.
The charger portion of this device will recharge the RV 12-volt DC coach batteries when you are using your
generator or shore power. The length of time it takes to take to recharge the batteries will depend on how much it has
been depleted, and by the ambient temperature. Cold temperatures will require longer charge time than in warmer
temperature. When running the generator or being plugged into shore power, this will not become a concern because
batteries will be continuously charged. All chargers have smart charge technology and will sense the battery
condition and step current flow up or down as needed.
NOTE:
See the
specifications
section for exact location (where applicable).
It is important that you read the manufacturer’s instructions for operation and maintenance of the power
inverter/charger.
GROUND FAULT INTERRUPTER/BREAKER (GFCI)
The GFCI function is to protect against severe electrical shock. You will find all general-purpose receptacles on
a GFCI breaker. It is a highly sensitive circuit breaker that senses a problem or fault with the current flowing to
through the plug and to an appliance such as a hair dryer, electrical skillet, etc. and breaks the path to the
receptacle.
If the GFCI blows or trips, turn off the appliances involved and follow the GFCI manufacturer’s instructions on
resetting. If the GFCI continues to blow or trip contact your dealer or service center for inspection and repair.
It is very important that you read the manufacturer’s instructions for operation testing and the
maintenance of the ground fault interrupter/breaker.
The GFCI is a device that protects against severe shocks due to faulty currents. It is not made to protect against
over current. Do not add breakers or fuses that are over the amperage that was originally installed.
To ensure your safety, test the GFCI often. A GFCI that is continually tripping is an indication of a problem in the
electrical system. Have your system checked by a certified service technician.
MAINTENANCE
Test GFCI before you leave on a trip, weekly when camping or, at least every 30 days. To test
the circuits press the test button which will turn off the power to the outlet. Press the reset button, if the
button comes back out then it appears to be working properly. If it does not pop back out, have it checked
by a certified technician.
Summary of Contents for vienna 2021
Page 57: ...57 ...