Rev.1.01 2007.02.16
RJJ10J1643-0101
122
RAPI_TRD_F32 Selects
f
32
for the timer RD count source.
RAPI_TRD_F40M Selects
fOCO40M
for the timer RD count source.
RAPI_TRE_F4 Selects
f
4
for the timer RE count source.
RAPI_TRE_F8 Selects
f
8
for the timer RE count source.
RAPI_TRE_F32 Selects
f
32
for the timer RE count source.
RAPI_TRE_FC4 Selects
fC4
for the timer RE count source.
RAPI_TIMER_ON
Sets the timer to start operating in __CreateOutputCompare.
RAPI_TIMER_OFF
Sets the timer to stop operating in __CreateOutputCompare.
RAPI_TIMER_OVERFLO
W
Enables the overflow interrupt.
RAPI_COMPARE_MATCH
Enables the comparematch interrupt.
RAPI_COMPARE_MATCH
_A
Enables the GRA compare match interrupt.
RAPI_COMPARE_MATCH
_B
Enables the GRB compare match interrupt.
RAPI_COMPARE_MATCH
_C
Enables the GRC compare match interrupt.
RAPI_COMPARE_MATCH
_D
Enables the GRD compare match interrupt.
RAPI_COUNT_CLEAR_A
Specifies GRA compare match for the cause of counter clear.
RAPI_COUNT_CLEAR_B
Specifies GRB compare match for the cause of counter clear.
RAPI_COUNT_CLEAR_C
Specifies GRC compare match for the cause of counter clear.
RAPI_COUNT_CLEAR_D
Specifies GRD compare match for the cause of counter clear.
RAPI_COUNT_CLEAR_SYNC
Clear counter in sync with the synchronized other timer counter
RAPI_TIMER_SYNC
Synchronize timer on channels 0 and 1.
RAPI_CMP00_DISABLE
Disables CMP output from CMP0
0
.
RAPI_CMP01_DISABLE
Disables CMP output from CMP0
1
.
RAPI_CMP02_DISABLE
Disables CMP output from CMP0
2
.
RAPI_CMP10_DISABLE
Disables CMP output from CMP1
0
.
RAPI_CMP11_DISABLE
Disables CMP output from CMP1
1
.
RAPI_CMP12_DISABLE
Disables CMP output from CMP1
2
.
RAPI_CMP00_ENABLE
Enables CMP output from CMP0
0
.
RAPI_CMP01_ENABLE
Enables CMP output from CMP0
1
.
RAPI_CMP02_ENABLE
Enables CMP output from CMP0
2
.
RAPI_CMP10_ENABLE
Enables CMP output from CMP1
0
.
RAPI_CMP11_ENABLE
Enables CMP output from CMP1
1
.
RAPI_CMP12_ENABLE
Enables CMP output from CMP1
2
.
RAPI_OUTPUT_
REVERSE_0
Inverts CMP output from CMP0
0
through CMP0
2
.
RAPI_OUTPUT_
REVERSE_1
Inverts CMP output from CMP1
0
through CMP1
2
.
RAPI_RELOAD
Sets TC register to “0x0000” when compare 1 matches.
