90
Description:
The [Address] group box sets the address bus conditions.
Table 4.13 [Address] Group Box Options
Option
Description
[Don’t care] check box
Does not set address conditions.
[Address] radio button
Sets use of the normal address bus as break conditions.
[Only program fetched
address after] radio button
Sets a break after prefetched address execution as break conditions.
[Address] edit box
Sets the address bus value with a number or a symbol.
[Mask] list box
Sets the mask bits if [User mask] is selected. For masked bits, the
break condition is satisfied regardless of the address values.
The contents of an option that can be set will change depending on the radio button selected.
Table 4.14 Radio Button Options
Option
Description
[Address] radio button
All conditions can be set.
[Only program fetched address after] radio
button
The [Address] condition can be set.
The [Data] group box sets the data bus conditions.
Table 4.15 [Data] Group Box Options
Option
Description
[Don’t care] check box
No data conditions are set.
[Value] edit box
Sets the data bus with a number.
[Low byte] radio button
Sets data access size as the lower 8-bit access.
[High byte] radio button
Sets data access size as the upper 8-bit access.
[Word] radio button
Sets data access size as the word access.
Summary of Contents for H8S/2378F
