Renesas RYZ012A1 Pmod™ Expansion Board Disclaimer
By using this RYZ012A1 Pmod Expansion Board, the User accepts the following terms, which are in addition to, and control in the event of disagreement,
with Renesas’ General Terms and Conditions available at
The RYZ012A1 Pmod Expansion Board is not guaranteed to be error free, and the entire risk as to the results and performance of the RYZ012A1 Pmod
Expansion Board is assumed by the User. The RYZ012A1 Pmod Expansion Board is provided by Renesas on an “as is” basis without warranty of any
kind whether express or implied, including but not limited to the implied warranties of good workmanship, fitness for a particular purpose, title,
merchantability, and non-infringement of intellectual property rights. Renesas expressly disclaims any implied warranty.
Renesas does not consider the RYZ012A1 Pmod Expansion Board to be a finished product and therefore the RYZ012A1 Pmod Expansion Board may not
comply with some requirements applicable to finished products, including, but not limited to recycling, restricted substances and electromagnetic
compatibility regulations.
Renesas or its affiliates shall in no event be liable for any loss of profit, loss of data, loss of contract, loss of business, damage to reputation or goodwill, any
economic loss, any reprogramming or recall costs (whether the foregoing losses are direct or indirect) nor shall Renesas or its affiliates be liable for any
other direct or indirect special, incidental or consequential damages arising out of or in relation to the use of this RYZ012A1 Pmod Expansion Board , even
if Renesas or its affiliates have been advised of the possibility of such damages.
Renesas has used reasonable care in preparing the information included in this document, but Renesas does not warrant that such information is error free
nor does Renesas guarantee an exact match for every application or parameter to part numbers designated by other vendors listed herein. The information
provided in this document is intended solely to enable the use of Renesas products. No express or implied license to any intellectual property right is
granted by this document or in connection with the sale of Renesas products. Renesas reserves the right to make changes to specifications and product
descriptions at any time without notice. Renesas assumes no liability for any damages incurred by you resulting from errors in or omissions from the
information included herein. Renesas cannot verify, and assumes no liability for, the accuracy of information available on another company’s website.
Precautions
This RYZ012A1 Pmod Expansion Board is only intended for use in a laboratory environment under ambient temperature and humidity conditions. A safe
separation distance should be used between this and any sensitive equipment. Its use outside the laboratory, classroom, study area, or similar such area
invalidates conformity with the protection requirements of the Electromagnetic Compatibility Directive and could lead to prosecution.
The product generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be
determined by turning the equipment off or on, you are encouraged to try to correct the interference by one or more of the following measures:
• Ensure attached cables do not lie across the equipment.
• Reorient the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
• Power down the equipment when not in use.
• Consult the dealer or an experienced radio/TV technician for help.
Note: It is recommended that wherever possible shielded interface cables are used.
The product is potentially susceptible to certain EMC phenomena. To mitigate against them it is recommended that the following measures be undertaken:
• The user is advised that mobile phones should not be used within 10 m of the product when in use.
• The user is advised to take ESD precautions when handling the equipment.
The RYZ012A1 Pmod Expansion Board does not represent an ideal reference design for an end product and does not fulfill the regulatory standards for an
end product.
