PCIe2 to S-RIO2 Eval Platform Quick Start Guide 2
April 20, 2015
Integrated Device Technology, Inc.
Formal Status
About this Document
The
PCIe2 to S-RIO2 Evaluation Platform Quick Start Guide
outlines the first steps to complete in order to get the board to a
powered on state.
Related Resources
The following related resources are available on the mySites area of www.idt.com:
• PCIe2 to S-RIO2 Evaluation Platform User Manual
• Tsi721 Evaluation Board Schematic
• Tsi721 User Manual
• CPS-1432 User Manual
PCIe2 to S-RIO2 Evaluation Platform Quick Start Guide
Kit Contents
Handling Procedure
Components on the evaluation platform are sensitive to electrostatic discharge (ESD); therefore, use standard ESD protection
when handling the board.
The printed circuit board is fragile. Excessive force will cause the circuit board to flex and possibly break the thin solder joint
between the components and the circuit board. Severe flex may also break internal connections in the board. When handling
the evaluation platform, adhere to the following guidelines:
• Support the circuit board when inserting or removing the ATX connectors.
• Do not push the AMC modules with excessive force.
• Do not push with excessive force on the JTAG, I2C, USB, and SMA connectors.
Part Number
Components
Description
TSI721-16GEBI
Evaluation Board
• PCIe2 to S-RIO2 Evaluation Platform with Tsi721 and CPS-1432
•
PCIe2 to S-RIO2 Evaluation Platform Quick Start Guide
RapidFET JTAG -
Standard
a
Debug Tool
with a 30-day trial of the
“Enhanced” functionality
a. For more information about the RapidFET JTAG - Standard and Enhanced debug tools, go to the Fabric Embedded
Tools website at www.fetcorp.com.
• RapidFET USB to JTAG/I2C Module
• RapidFET JTAG USB Key
• USB Cable, 1 m
• RapidFET JTAG Quick Start Installation Guide
