1 About this manual
Renfert
4 / 28
Easyclean MD
1
About this manual
IMPORTANT
Please read the manual before using the product. This manual forms part of the con-
tents supplied with the unit. Keep the manual in an accessible place close to the
product, and keep it with the product if it is sold on.
Meaning of the symbols used:
This symbol denotes lists.
This symbol denotes requirements.
Numbers with a dot denote actions.
This symbol denotes individual actions.
This symbol denotes interim results.
This symbol denotes the result of an action.
Numbers without a dot denote image labels.
1.1
User
In the manual, the term User refers to all persons who transport, set up, connect, operate and maintain
the unit. The manual is aimed at persons with appropriate technical knowledge and experience in hand-
ling similar units.
The user is at least 16 years old. They must have read and understood the manual and be capable of
following all notes and instructions.
All tasks that go beyond the pure operation of the unit within the scope described here must be per-
formed by qualified and authorised specialists.
1.2
Other applicable documents
In addition to the specifications given in this manual, the following documents and directives also apply
and may take precedence. This list is not exhaustive:
• Regional safety regulations and other locally applicable provisions.
• Safety data sheet and dosing instructions of the cleaning agents used.
• All serious incidents that occur in connection with the product must be reported to the manufacturer
and the responsible authority of the member state in which the operator and/or the patient are resid-
ent.
1.3
Factory settings
The unit is delivered with predefined factory settings that determine the type and version of various unit
functions. All information given in this manual is based on the use of a unit that is being operated with
the factory settings unchanged.
Unit functions can be customised in
Setup
mode. If this has been done, the unit functions can differ from
the information given in this manual. If discrepancies are found, the unit can be reset to the factory set-
tings.
