34
7. Connections and Control Elements
Figure, see page 3
(1) POWER mains switch
Turns the player on or off.
(2) Mains connection AC IN
Plug in the provided mains cable here.
(3) OUTPUT connection
The audio output signal of the device is output to these RCA sockets. Connect the inputs of your mixer
here.
(4) FADER-START connection
3.5mm jack plug connection for the fader start function.
(5) CD loading chute
Push a CD for playback in here. Always insert the CD with the printed side up.
(6) EJECT button
Push this button to eject the CD. The CD cannot be ejected during CD playback.
(7) SD connection
Insert your SD storage medium here.
(8) USB connection
Insert the USB storage medium here.
(9) CD/USB/SD button
Use this button to select the playback carrier (source) CD, USB or SD.
(10) Dial switch TRACK/FOLDER
The dial switch can be used to select a specific track (TRACK) or folder (FOLDER) on the storage me-
dium. To confirm your selection, push the dial.
(11) FOLDER button
This button changes the function of the dial TRACK/FOLDER (10). Select either track or folder skipping.
(12) PLAY/PAUSE button
Use this button to start or pause playback. During playback the button is lit, during pause it flashes.
(13) CUE button
Use this button to reset to the CUE point and to start the CUE function.
Summary of Contents for 1216218
Page 3: ...3...
