35
(14) JOG wheel
Turning the JOG wheel permits searching the track or influencing playback speed.
(15) Display
The display shows the most important settings and information of the playback medium.
(16) VINYL button
Activate the SCRATCH function (VINYL function) with this button. You can now scratch the track se-
lected with the JOG wheel (14) in PLAY or PAUSE mode like on a record player.
(17) BRAKE button
The BRAKE function makes the music playback start or stop slowly after the PLAY/PAUSE button (13)
was pushed. This function simulates start-up or stop of a record.
(18) REVERSE button
When the REVERSE function is activated, the track is played backwards.
(19) REPEAT button
Use this button to select the playback function (REPEAT 1 / REPEAT ALL).
(20) IN button
The device allows you to save a “seamless” playback loop. For this purpose, the device has the but-
tons IN (20), OUT (21) and RELOOP (22).
Use the IN button to program the starting point of the playback loop.
(21) OUT button
Use the OUT button to program the end point of the playback loop or quit the playback loop by pressing
it once again.
(22) RELOOP button
Use this button to play the saved playback loop.
(23) SGL/CNT button
Use this button to switch the player between individual SINGLE-track playback and continuous (CON-
TINUE) track playback.
(24) TIME button
This button switches between the different play time display options of the display (elapsed track play
time > Remaining track play time > Total remaining play time).
(25) SEARCH buttons
These buttons activate fast forward or rewind. While one of the two buttons is pushed, playback is
muted. Use the time shown in the display for searching.
Summary of Contents for 1216218
Page 3: ...3...
