45
f) Deleting the Outdoor Unit from the Memory of the Mobile Unit
The enclosed mobile unit has already been registered at the outdoor unit by the manufacturer.
Re-registering is usually not necessary.
However, if the mobile unit is unable to connect to the outdoor unit, you may start a new registra-
tion process (see previous chapter).
If the registered outdoor unit is to be deleted from the mobile unit memory, proceed as follows:
• Activate the mobile unit‘s display (e.g. briefly push the button „
“ or any other button).
• Keep the left function button (11) below the display „Menu“ and the button „
“ (17) pushed for
5 seconds.
If the display shows „Registration cleared“, the outdoor unit has been removed from the mobile unit.
• Now you need to register the outdoor unit at the mobile unit again. Observe chapter 10. e), Function
„Register“.
g) Setting the Activation Time for the Door Opener
In the basic setting, the door opener is activated for 5 seconds when the button „
“ (17) is pushed.
This activation time can be changed as follows:
• Activate the mobile unit‘s display (e.g. briefly push the button „
“ or any other button).
• Keep the buttons „
“ (12) and „
“ (17) pushed at the same time
for 5 seconds, until the display shows „Unlock Time“.
• Use the arrows „
/
“ to select „1#“ (outdoor unit).
• Use the arrows „
/
“ to set the activation time between 1 se-
cond and 25 seconds.
• Push the right function button (15) under „Save“ to save the set time
and terminate the setting mode.
