27
c) Adjusting volume
Before you start the playback, reduce the volume of the TV completely and then slowly increase its volume
level before adjusting the volume directly on the product.
• Press the volume control (6, 15) to increase (+) or decrease (-) the volume. Push and hold to fast-forward.
• Press the MUTE (10) button to mute the speakers. Press the MUTE button again or the volume knob to reactivate
the speakers.
If the speakers do not emit any sound and the display shows "PLEASE CHANGE YOUR SOURCE DEVICE
TO PCM MODE UNDER AUDIO OUTPUT SETTING", then activate the PCM mode for the optical audio
output on the source unit.
d) Equalizer
• Press one of the Equalizer buttons NEWS / MOVIE / MUSIC (13) to set the desired sound effect.
Sound effect Suitable for
NEWS
News, reports, interviews, etc.
MOVIE
Movies, series
MUSIC
Music
• The corresponding indicator appears on the display.
e) Setting the display brightness
In standby mode, you can change the display brightness using the volume control.
f) Bluetooth
®
connection
• Select the audio source BT. The display shows "NO BT", if the product is not connected to any Bluetooth
®
device.
• The product is in pairing mode. Alternatively, keep the PAIR button (12) pressed for about 2 seconds. From the
speakers, the message "pairing" is announced and the display shows "PAIR".
• Activate search mode on your Bluetooth
®
device.
• Select "renkforce TT318" from the list of available devices. The connection is considered successful after the
message "paired" is announced from the speakers. "BT" appears on the display.
• Start playback.
• To disconnect, select a different audio source on the product or turn off the Bluetooth
®
function on your Bluetooth
®
device.
• If you disconnect on your Bluetooth
®
device, the message "Disconnected" is announced from the speakers.
