b) Power Adaptor
• Connect the appliance to a wall socket that can be accessed easily.
• As power supply, only use the supplied mains adaptor.
• Only connect the power adaptor to a normal mains socket connected to the public
supply. Before plugging in the power adaptor, check whether the voltage stated
on the power adaptor complies with the voltage of your electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the cable;
always use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• For safety reasons, disconnect the power adaptor from the mains socket during
storms.
c) Persons and Product
• Do not listen to excessively loud music over an extended period of time, as this
can cause hearing damage.
Product Overview
Power
Volume
3
4
5
6
1
2
1 Audio input select (touch button)
2 LED status indicator
3
Power
(on/off),
Volume
control
4 Speaker element
5 USB power cable
6 3.5 mm AUX input
Setting Up
• Choose a suitable location for your speaker. The speaker elements
(4)
should be positioned
in front, spread-out, and angled towards the listener.
• Connect the included adaptor to a power outlet, then connect the USB power cable
(5)
to
the adaptor.
• Decide how you would like to connect to the audio source. Available methods are:
- Wireless: Bluetooth 5.0
- Wired: AUX in
Operation
a) Bluetooth Wireless Pairing
• Turn the
Power
dial
(3)
clockwise to turn the speakers on, keep the volume levels low.
The speaker will enter pairing mode each time it is turned on and will automatically
connect to any previously paired devices.
• Wait for the voice prompt “Bluetooth mode”, the LED status indicator
(2)
will blink.
• Select “RF-SPKR-100” from your playback device Bluetooth menu, then wait a few mo-
ments for the connection to be made.
• A chime will sound and the LED status indicator
(2)
will be constantly on to indicate that
pairing is successful.
• Turn the
Volume
dial
(3)
clockwise to increase the volume level.
Refer to your device operating instructions for further information about how to ena-
ble Bluetooth pairing.
Operating Instructions
2 PC Speaker Wireless 6 W Black-Grey
Item no. 2162591
Intended Use
This product is designed to play sound from audio systems such as a computer sound card
or portable device. The speakers can connect using a wired 3.5 mm connector or wirelessly
through Bluetooth 5.0. Switch inputs using the touch button and power the device through the
included USB mains adaptor.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g.
in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the instruc
-
tions carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with statutory national and European regulations. All company and pro-
duct names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Speakers (pair)
• Power adaptor
• Operating instructions
Up-to-Date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle indicates that there is a risk to your
health, e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instruc-
tions. Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
This product must only be used in dry, enclosed indoor areas. It must not become
damp or wet, as this may result in a fatal electric shock!
Safety Information
Read the operating instructions and safety information carefully. If you do not
follow the safety instructions and information on proper handling in this ma-
nual, we will assume no liability for any resulting personal injury or damage to
property. Such cases will invalidate the warranty/guarantee.
a) General Information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become dan-
gerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
•
Maintenance, modifications and repairs must be done by a technician or an au
-
thorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
