Operating instructions
Power strip
Item no. 1384364 (6 socket power strip, 5 m)
Item no. 1384365 (3 socket power strip, 5 m)
Intended use
The power strip provides additional mains sockets with protective earth contacts, which can be used to
connect electrical loads. All of the sockets can be turned on or off together using the on/off button, which
features a built-in light. The protective lids are self-closing.
The product is designed for outdoor use (IP44 rating). Power is supplied via a mains socket with protective
earth contacts (230 V/AC, 50 Hz).
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use
can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
•
Power strip
•
Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads
or scan
the QR code shown. Follow the instructions on the website.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If
you do not follow the safety instructions and information on proper handling in this manual,
we assume no liability for any resulting personal injury or damage to property. Such cases
will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, flammable
gases, vapours and solvents.
• Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. Safe operation can no longer be guaranteed if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
•
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
•
Also observe the safety information and operating instructions of any other devices which
are connected to the product.
•
The
product
is
designed
for
outdoor
use
and
is
splash-proof.
However, do not immerse the product in water and do not let any water get into the product.
Do not directly expose the product to rain.
•
The product is equipped with a protection against accidental contact. An integrated
mechanism will release the holes of the receptacle only, if the two prongs of a power plug
are inserted into the two holes at once.
•
Take special caution when children are around. Children cannot recognize the danger
arising from the incorrect use of electrical devices. There is a risk of a life-threatening
electric shock!
•
The device was built according to protection class I. Only a proper mains socket (230 V/AC,
50 Hz) of the public supply net must be used as voltage source.
•
Do not overload the product! Pay attention to the connection data and the maximum
permitted total power consumption of all connected loads in the "Technical data" section.
• Do not connect any additional power strips to the product! This can lead to an overload,
which constitutes a fire hazard!
• Do not cover the power strip! The power strip and the connection cable will become warm
when there is a high connected load. This constitutes a fire hazard!
•
The power strip is only isolated from the mains when the power cable has been unplugged
from the mains socket!
•
Completely unwind the mains cable when using the power strip. Lay the cable such that
nobody will trip over it.
•
The mains socket that the product is plugged into must be easily accessible.
•
Unplug the mains plug from the mains socket if you do not use the device for an extended
period of time.
•
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the
mains socket using the intended grips.
•
Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
•
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put
under mechanical stress. Avoid excessive thermal stress on the mains cable from extreme
heat or cold. Do not modify the mains cable. Otherwise the mains cable may be damaged.
A damaged mains cable can cause a deadly electric shock.
•
Do not touch the mains cable if it is damaged. First, power down the respective mains
socket (e.g. via the respective circuit breaker) and then carefully pull the mains plug from
the mains socket. Never use the product if the mains cable is damaged.
•
A damaged mains cable may only be replaced by the manufacturer, a workshop
commissioned by the manufacturer or a similarly qualified person, so as to prevent any
danger.
•
Never plug in or unplug the mains plug when your hands are wet.
•
Never pour liquids over or near the product. This constitutes a serious fire hazard and
may result in a fatal electrical shock. If liquid does enter the interior of the power strip,
immediately isolate the power strip's mains plug from the mains (turn off fuse/circuit
breaker/residual current circuit breaker for the corresponding circuit). Once you have
isolated the power strip from the mains, unplug it from the mains socket and consult a
technician. Do not continue to use the product.
•
Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or
at a qualified shop.
•
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Operation
The product can either be screwed to a surface or hung on a wall using the side openings.
Only mount the product on a stable surface and use suitable screws (and dowels if
necessary). Ensure that no cables or wires are damaged during drilling/screwing.
•
Plug the power strip into a properly grounded mains socket (wall socket). When using the product
outdoors, the mains socket must have at least an IP44 protection rating.
•
Connect up to six (item no. 1384364) or three (item no. 1384365) devices to the sockets on the power
strip. When using the product outdoors, the mains plugs of the connected devices must have an IP44
protection rating.
•
The sockets can be turned on/off using the on/off switch ("I" = on, "O" = off). The light in the on/off switch
illuminates when the sockets are turned on.
Maintenance and cleaning
• You do not need to carry out maintenance work on the product. Under no circumstances should
you service any of the components in the interior of the product, therefore disassemble it. Repair or
maintenance work must only be carried out by a specialist or a repair centre.
•
Disconnect the product from the mains before cleaning and remove all connected devices from the
power strip.
•
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage
the casing or even impair the functioning of the product.
• Use a dry, soft and clean cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Connection data
......................................
230 V/AC, 50 Hz
Total power consumption ......................
max. 3680 W, 16A
Earthed mains sockets ...........................
6 (item no. 1384364)
Enhanced protection against accidental contact
3 (item no. 1384365)
Enhanced protection against accidental contact
Protection class
......................................
I
Protection type
........................................
IP44
Cable length and type
.............................
approx. 5 m, H07RN-F3G 1.5 mm²
On / off switch
..........................................
2 poles (N/L),
....................................................................
with integrated control light
Operating conditions
..............................
-20 °C to +50 °C
Storage conditions
..................................
-20 °C to +50 °C, 15 % - 85 % RH
Dimensions (W x H x D)
..........................
Approx. 453 x 55 x 70 mm (item no. 1384364)
Approx. 285 x 55 x 70 mm (item no. 1384365)
Weight
.......................................................
Approx. 1.2 kg (Item no. 1384364)
Approx. 0.9 kg (Item no. 1384365)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
*1384364_5_v4_0620_02_dh_m_en
