• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b)
Rechargeable batteries
• The rechargeable battery is built into the product and cannot be replaced.
• Never attempt to damage the rechargeable battery. Damaging the casing of the
rechargeable battery may cause it to explode or catch fire! Unlike conventional
batteries (e.g. AA or AAA batteries), the casing of the LiPo rechargeable battery is
made of a sensitive plastic film.
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into open flames. This may cause a fire or explosion!
• Charge the rechargeable battery regularly, even when you are not using the
product. You do not need to discharge the rechargeable battery before recharging
it.
• Never charge the battery when the product is unattended.
Product overview
1
2
3
4
1 ON/OFF switch
2 Data tag key for position marking
3 Status indicator and loading status
4 GPS status indicator / memory status
Operation
a) Charging the rechargeable battery
•
The battery needs to be charged for approximately 4 hours before first use. Subsequent
charges usually take about 2 hours.
• Connect the device to a USB port with an output current of least 500 mA. This can be either
a USB power adapter or a USB port on your computer.
• The status indicator (3) will turn green when the battery is charging. It will turn off again when
the battery is fully charged. The status indicator (3) will turn red when the battery is empty.
b) Turning on and off
• To turn the device on and off, move the on/off switch to the corresponding position.
•
We recommend that you place the GPS logger outside for approximately 15–20 minutes
before first use to ensure that it detects all GPS satellites. This is indicated by the status
indicator (4).
Status indicator (4):
- Constant blue = Position not detected
- Flashing blue (slow) = Position detected
- Flashing blue (fast) = Location information is being recorded
c) Installing the software / USB driver
• Insert the software CD into the CD drive.
• Run the software installer and follow the onscreen instructions.
• Once you have installed the software, insert the device into a USB port and turn it on using
the on/off switch (1). The GPS data logger will be recognised by the operating system.
• Launch the software.
• Refer to the manual on the CD for detailed instructions on how to install and use the software.
d)
Recording data / data tag
• Switch on the device using the on/off switch (1).
•
We recommend that you place the GPS logger outside for approximately 15–20 minutes
before first use to ensure that it detects all GPS satellites. This is indicated by the GPS status
indicator (4) (see "b) Turning on and off").
• Press and hold the data tag button (2) for a few seconds to locate your position. The blue
status LED (4) will start to flash quickly.
Signal reception may be impaired by obstacles such as buildings, tunnels and
trees. Other sources of interference can also affect performance (e.g. if the device
is connected to a computer when it is attempting to locate your position for the first
time). For best results, allow the device to obtain your position before connecting it
to a computer.
Care and cleaning
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Operating instructions
GPS-data logger GT-730
Item no. 373686
Intended use
This USB GPS data logger features a GPS receiver with an SIRF-4 chipset. It is designed
to track your location and can record up to 256,000 values. The GPS receiver is fitted with a
built-in (non-removable) lithium polymer battery. This allows you to use the device without an
external power supply. The GPS receiver can be connected to a computer via a USB port to
read data and charge the battery. It also comes with a software CD that enables you to display
information graphically and analyse positioning data.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Delivery contents
• GPS dongle
• Protective cap
• CD with driver/software/digital user manual
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
System requirements
• Laptop or desktop PC with a free USB port
•
CD-ROM drive
•
Approx. 55 MB free hard disk space
• Operating system: Windows
®
98SE or later (up to Windows
®
7)
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to your
health, e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we will assume no liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
•
Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
