Operation
1. Connect the two square USB type B connectors with a free USB port of your PC
using an appropriate USB cable.
2. Connect your USB device with the USB type A socket of the USB switch. More
USB devices can be connected using other hubs.
3. Press the “Select” button on the USB switch to switch between the connected
computers. The green LED is on to indicate which computer is connected with the
peripheral device at the moment.
4. The USB switch has a special key combination; however, it is only available for
Windows. It enables comfortable switching. To address the USB switch, press the
“Scroll Lock” key on the PC keyboard twice within two seconds. The key combi-
nation does not function, if the currently connected computer is switched off or in
sleep mode.
Do not use the Hotkey-application when the green LED(s) is flashing.
If you used the hotkey combination for switching, then wait for approx. 30
seconds before doing a switchback. This gives the operating system suf-
ficient time to detect and link the USB device.
Do not switch the USB port when the connected USB peripheral device is in
use.
Cleaning
Use a dry and lint-free cloth to clean the product. For stronger contamination, use a
cloth that is slightly moistened with lukewarm water.
Disposal
The product may not be disposed of in the domestic waste.
Dispose of an unserviceable product in accordance with the relevant statu-
tory regulations.
Technical data
Power supply ..................... via USB
USB type B port .................. 2x (per PC)
USB type A port .................. 1x (for USB device or USB hub connection)
Dimensions.......................... 85 x 65 x 23 mm (L x W x H)
G
Operating instructions
2-port USB switch “KOMFORT”
Item no. 1362467
Intended use
The product is intended for connection to PC compatible computers with USB ports
and designed for simple transition between USB devices connected.
The USB switch complies with USB 2.0 specification und is downward compatible
with USB 1.1. For switch operation, connection with PC with USB ports is required.
USB switch is only to be operated in dry interior environments. Any other use than the
described above is not permitted and can damage the device and create hazards such
as short circuits, fire, electric shock etc.
No part of the product should be modified or rebuilt. Please read all safety instructions
contained in these operating instructions and keep these for further reference.
All company names and product designations contained herein are trademarks of the
respective owners. All rights reserved.
Package contents
• USB switch
• Operating instructions
Safety instructions
The warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! Nor do we assume any liability for any
consequential, material and personal damage caused by improper use or
non-compliance with the safety instructions!
• Any modification or conversion of the product will invalidate both the CE
approval and warranty.
• Follow also the safety instructions and operating instructions of other de-
vices connected via the USB switch.
• Handle the product with care and avoid dropping, as it can be damaged by
impacts or accidental drops even from a low height.
• The product must not be subjected to heavy mechanical stress.
• The product must not be exposed it to extreme temperatures, direct sun-
light, intense vibration or dampness.
• The product is not a toy and should be kept out of reach of children!
• If there is reason to believe that safe operation is no longer possible, the
device is to be put out of operation and secured against unintended op-
eration. Safe operation is no longer possible if the device:
- shows visible damages,
- no longer works,
- was stored under unfavourable conditions for a long period of time or
- was subject to considerable transport stress.
• Servicing, adjustment or repair works must only be carried out by a spe-
cialist/specialist workshop.
• If any questions arise that are not answered in this operating instruction,
contact our Technical Advisory Service or other experts.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
