• Never short-circuit the contacts of the rechargeable battery or throw the battery or
product into open flames. This may cause a fire or explosion!
• Charge the battery regularly, even when you are not using the product. You do not
need to discharge the battery before recharging it.
• Never leave the battery unattended when it is charging.
• Place the product on a heat-resistant surface before charging the battery. The
product may become warm when the battery is charging.
c) Persons and product
•
Never pour any liquids over electrical devices or place objects filled with liquid next
to the product. If liquid or an object does enter the interior of the device, power
down the respective socket (e.g. switch off the circuit breaker), and then remove
the mains plug from the mains socket. Discontinue use and take the product to a
specialist repair centre.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated may destroy the product. Allow the
product to reach room temperature before connecting it and putting it to use. This
may take several hours.
• When setting up the product, make sure that the cables are not pinched, kinked
or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This may cause an injury.
• Do not listen to loud music for long periods of time, as this may cause hearing
damage.
Product overview
1
2
3
5
6
7
4
1 3.5 mm analogue jack input
2 Micro USB port
3 LED indicator
4 Ring LED
5
+
button
6
- button
7
-
button
Operation
a) Charging the internal battery
•
Fully charge the battery before using the speaker for the first time.
• Recharge the battery when the LED indicator (3) stops working.
• Insert the micro USB plug into the micro USB port (2) on the product, and then connect
the USB-A plug on the micro USB cable to a USB power source (e.g. USB power adapter).
Charging will start automatically when the USB power source delivers a current.
• Plug the USB power adapter into a mains socket.
• The LED indicator (3) will turn red to indicate that the battery is charging.
• The LED indicator (3) will turn off when the battery is fully charged.
• Unplug the power adapter from the mains and disconnect the product from the USB power
adapter (or other USB power source).
The LED indicator (3) will flash red light when the battery is nearly empty. The
speaker will play a warning tone and it turn off soon.
b) Turning the speaker on/off
• Press the
- button (6) for 3 seconds to turn on the speaker. The ring LED (4) flashes when
the speaker is not paired with a Bluetooth
®
device, and stays constant when a Bluetooth
®
device is connected. The speaker will play a notification tone to indicate that it is turned on.
• Press the - button (6) for 3 seconds to turn off the speaker. The ring LED (4) will turn off, and
the speaker will play a notification tone to indicate that it is switching off.
• The speaker switches off automatically after 3 minutes of inactivity.
c) Pairing the speaker with a Bluetooth
®
device
• The speaker needs to be paired with a Bluetooth
®
device in order to stream audio.
• Place the speaker and your Bluetooth
®
audio device at a distance of approximately 1 m from
one another and avoid interferences that may affect signal transmission (for example, do not
place the devices near strong electromagnetic fields or metal objects or behind reinforced
concrete walls).
• Ensure that Bluetooth
®
is enabled and that the Bluetooth
®
device you want to pair has all of
the necessary Bluetooth
®
drivers installed. Visit the manufacturer's website to download and
install the latest drivers.
Operating instructions
Bluetooth
®
speaker “Oyster1”
Item no. 1576983
Intended use
This product is designed to stream music from a Bluetooth
®
device. It is powered by a lithium-
ion rechargeable battery and features a 3.5 mm jack input, which allows you to play music from
devices with an analogue auxiliary output. You can also use the speaker to answer calls from
a connected mobile device.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture
(e.g. in bathrooms) must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as a short circuit, fire or electric shock. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Bluetooth
®
is a registered trademark of Bluetooth SIG, Inc. worldwide.
Delivery content
• Bluetooth
®
speaker
• 3.5 mm jack cable
• Charging cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to your
health, e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions and safety information carefully. If you do
not follow the safety instructions and information on proper handling in this
manual, we will assume no liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/guarantee.
a) General information
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly, as it may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
•
Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b)
Rechargeable battery
• The rechargeable battery is built into the product and cannot be replaced.
• Never damage the rechargeable battery. Damaging the casing of rechargeable
batteries may cause an explosion or a fire!
