This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
*1576983_v2_0917_02_DS_m_4L_(1)
• Turn on the Bluetooth
®
device and enable pairing mode (if necessary).
• Follow the instructions for your Bluetooth
®
device to pair it with the speaker. These may vary
depending on the manufacturer and design. Your device will search for available Bluetooth
®
devices.
• Press and hold the - button (6) for 3 seconds to turn on the speaker The ring LED (4) will
flash quickly if the speaker is not paired with a Bluetooth
®
device.
• Select “TWNT-SOH2000” on your Bluetooth
®
device (e.g. mobile phone or laptop) to pair it
with the speaker.
• You may be prompted to enter a password. Enter the password (or try using "0000") and
confirm your entry.
• The ring LED (4) will stay constant when the devices are paired via Bluetooth
®
, and the
speaker will play a notification tone.
•
Another notification tone will be played if the Bluetooth
®
connection is interrupted.
• If the devices do not pair within 30 seconds, turn off the speaker and try pairing the devices
again.
d) Answering/ending/declining phone calls
• When the speaker is paired with a mobile phone and you receive an incoming call, the current
track will be paused and the speaker will play a ringtone.
• Press the - button (6) to answer the incoming call.
• Press the - button (6) to end a call.
• You can also use the onscreen controls on your mobile phone to answer/end a call.
e) Wired audio playback
• If your audio device does not support Bluetooth
®
, you can connect it to the speaker using the
3.5 mm AUX cable.
• Connect the 3.5 mm analogue input (4) to the audio output on your audio device. The
speaker will play a notification tone and the ring LED (4) will flash slowly to indicate that
auxiliary mode is enabled.
• Start playback on your audio device.
• Use the controls on your audio device to control playback and adjust the volume.
• The Bluetooth
®
connection is automatically terminated when the 3.5 mm jack plug is inserted
into the speaker.
f) Buttons
Button
Function
-
button (7)
Press and hold to decrease the volume.
- button (6)
Press and hold for 3 seconds to turn the speaker on.
Press and hold for 3 seconds to turn the speaker off.
Press to answer or end a call.
Press to pause playback.
Press to resume playback. Press and hold for 2 seconds to refuse
an incoming call.
+
button (5)
Press and hold to increase the volume.
g) Troubleshooting
• If some features do not work properly, ensure that all of the necessary Bluetooth
®
drivers are
installed and up-to-date.
• Please note that some audio devices (e.g. smartphones) may not support the remote-
controlled features on the speaker. Check the list of features for your device (the AVRCP
protocol must be supported) and visit the website of your smartphone manufacturer. Updating
your device may help to resolve the issue.
• If there is no sound, try increasing the volume. If the issue persists, re-establish the Bluetooth
®
connection or pair the devices again.
• If the sound is distorted, ensure that the audio device and speaker are within 10 m of each
other and check that there are no sources of interference.
h) Care and cleaning
• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
• Do not clean the product by immersing it in water.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol, and then enter the product order
number in the search box. The EU Declaration of Conformity is available for
download in PDF format.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
Always dispose of the product according to the relevant statutory regulations.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Input voltage/current .......................5 V/DC, 0.5 A
Rechargeable battery .....................3.7 V/DC, 1500 mAh (integrated Li-ion battery)
Standby ..........................................>150 hours (full battery)
Output power ..................................3 W x 2 THD = 10 % W
Bluetooth
®
version ..........................4.2+EDR
Bluetooth
®
profile
............................APTX, SBC, MP3, ACC
Range .............................................Approx. 10 m
Frequency range (acoustic) ............100–18,000 Hz
Frequency range (electromagnetic) ...2.4 GHz to 2.48 GHz
Signal-to-noise ratio ........................Approx. 70 dBm
Connections ....................................3.5 mm jack
Charging time .................................4 hours
Battery life .......................................>3.5 hours (at 50 % volume)
Transmission power........................64 dBm
Sensitivity .......................................110 ± 3 dB (at 1 kHz)
Distortion ........................................0.6 % @ 1W
Impedance .....................................
4 Ω
Charging cable length .....................45 cm
Jack cable length ............................45 cm
Supported operating systems ......... Windows
®
2000, XP (Home, Pro, with SP1, SP2, SP3)
(32-bit), 10 (32/64-bit), Mac OS 10.7 to 10.10, Linux 5.0
to 6.0, Android 3.0 to 7.0, iOS 4, iOS 10.3.1, Blackberry
9530
Operating conditions ....................... 0 to +40 °C, 0–85 % relative humidity (non-condensing)
Storage conditions .......................... -30 to +60 °C, 0–90 % relative humidity (non-condensing)
Dimensions (W x H x D) .................185 x 200 x 80 mm
Weight ............................................685 g
