Care and cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may damage the
casing or cause the product to malfunction.
• Remove the smartphone before you clean the product.
• Use the provided cleaning cloth to clean the lenses.
• Use a dry, lint-free cloth to clean the product.
• The delivery includes a replacement pad (9). If necessary, replace it.
Disposal
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to protection of the environment.
Product overview
1
2
3
4
5
7
8
9
6
1 Setting focus distance
2 Latch
3 Setting pupil distance
4 Headband
5 Housing
6 Front cover (detachable)
7 Button
8 Lens
9 Pad
Operation
1
2
3
4
a) Set up
1. Remove the protective film from the lenses (8).
2. Download a VR game and verify that the display splits (see
1
).
3. Open the front flap (see
2
).
4. Place the smartphone on the support (see
2
). Centre the smartphone.
5. Close the flap. Make sure that it snaps into place.
6. Put on the glasses. They should sit on your head comfortably.
- Adjust the length of the headband to your head.
7. Set the focus and the pupil distance with the dials (see
3
).
• Guide the cables you need (e.g. charging cable) through the openings to the inside.
b) Play games
You can control games in two ways:
• Gyro: Turn and tilt your head (see
4
).
• Gamepad: Use a Bluetooth gamepad to control your smartphone.
• Use the butoon (7) for “Google Cardboard”.
c) AR apps
Remove the front cover (6) to ensure your smartphone camera has an unobstructed view for augmented
reality apps.
Technical data
Lens diameter ................................................................. 40 mm
Pupil distance ................................................................. 60 – 70 mm
Focus distance ............................................................... 37.5 – 46.5 mm
Field of view .................................................................... 90 - 100º
Smartphone display size (diagonal) ............................... 4.7 – 6" (11.94 – 15.24 cm)
Operating conditions ....................................................... 0 to +40 °C, 40 – 95 % RH
Storage conditions .......................................................... -10 to +75 °C, 40 – 95 % RH
Dimensions (W x H x D) ................................................. 185 x 100 x 138 mm
Weight ............................................................................ 278 g
Operating instructions
VR/AR glasses RF-VR1v2
Item no. 1620640
Intended use
The product is intended for viewing 3D VR/AR applications (videos, games or apps) on a smartphone.
For safety purposes, you must not rebuild and/or modify this product. Using the product for purposes other
than those described above may damage the product. Read the instructions carefully and store them in a
safe place. Only make this product available to third parties together with its operating instructions.
This product complies with statutory national and European regulations. All company and product names are
trademarks of their respective owners. All rights reserved.
Delivery Content
• Glasses
• Pad
• Cleaning cloth
• QR code card
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code shown.
Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
Safety information
Read the operating instructions and safety information carefully. If you do not follow the
safety information and information on proper handling in these operating instruction, we
will assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous toy
for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorised
use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Always observe the safety information and operating instructions of any other devices which
are used with the product.
• Do not use the product for viewing bright sources of light, in particular the sun. Observing
unfiltered sunlight for just a fraction of a second can lead to permanent blindness.
• Risk of fire! Improper use can cause the lenses to act as a burning glass, resulting in the
concentration of solar radiation on a very small point and in the generation of very high
temperatures.
• Sustained use can cause fatigue. Use the product reasonably.
• The product can lead to epileptic episodes in some persons.
• If your eyes feel irritated, stop using the product. If this does not help, consult a doctor.
• Use the product in a safe environment. Use of the product can cause loss of balance. Make
sure your environment is safe and secure before putting on the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a specialist repair
centre.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE.
*1620640_v1_0318_02_jh_m_en
