Users Manual
7KHYHUWLFDOSDQHLQHDFK3URSHUWLHVZLQGRZSURYLGHVIRUORXGVSHDNHULGHQWL¿FDWLRQDQGVHOHFWHGFRQWUROIHDWXUHV6HHEHORZIRUGHWDLOV
Status Indicators:
7KH7KHUPDO3HDNDQG)DLOLQGLFDWRUVDERYHWKHRXWSXWPHWHUSURYLGHFULWLFDOLQIRUPDWLRQRQWKHDPSOL¿HUVVWDWXV7KH
3HDNLQGLFDWRUZLOOÀDVK\HOORZRUUHGZKHQHYHUWKHGHYLFH¶VSHDNOLPLWHULVWULJJHUHG,W¶VQRUPDOIRUWKHLQGLFDWRUWRÀDVKRFFDVLRQDOO\LI
the loudspeaker is being used close to its rated output. Flashing frequently is a sign that the system volume needs to be turned down. The
7KHUPDOLQGLFDWRUZLOOVWDUWWRÀDVK\HOORZDVWKHDPSOL¿HUWHPSHUDWXUHDSSURDFKHVDSUHVHWOHYHODQGZLOOWXUQUHGLIWKHWHPSHUDWXUHFRQWLQ
XHVWRLQFUHDVHDVDZDUQLQJWKHDPSOL¿HULVDERXWWREHVKXWGRZQ7KH)DLOLQGLFDWRUJORZVUHGZKHQWKHDPSOL¿HUKDVEHHQVKXWGRZQE\
WKHSURWHFWLYHFLHDWUHODWHGVKXWGRZQVZLOOUHVHWDXWRPDWLFDOO\DIWHUWKHDPSOL¿HUFRROVGRZQWRDVDIHWHPSHUDWXUH
$VDIXUWKHUSURWHFWLYHPHDVXUHWKHDPSOL¿HU¶VJDLQZLOOJUDGXDOO\EHUHGXFHGLQUHVSRQVHWRRYHUKHDWLQJDQGRUWRKLJKDQLQSXWOHYHO
+RZHYHULW¶VEHVWWRPDQXDOO\UHGXFHWKHLQSXWVLJQDOOHYHORYHUDOOV\VWHPYROXPHLQUHVSRQVHWRGLVWUHVVVLJQDOV
Output Meters:
7KH9DQG:EXWWRQVEHORZWKHRXWSXWPHWHUVDOORZ\RXWRVZLWFKWKHPIURP9ROWVWKHPRUHFRQYHQWLRQDOGHIDXOWPHWKRG
to RHAON’s unique Watts meters. Watts are calculated by multiplying the actual output voltage across the driver by the actual current
WKURXJKLW7KLVLVPRUHDFFXUDWHWKDQFDOFXODWLRQVXVLQJDQLPSHGDQFH¿JXUH:DWWVPHWHULQJLVXVHGWRTXLFNO\LGHQWLI\RSHQFLUFXLWIDLOHG
drivers. Since open drivers draw no current, the output meter will remain at zero regardless of the input level.
Loudspeakers model number or name
Input signal level bar graph; “0” indicates
the onset of input clipping. Analog inputs
clip at +12 dBu without the 10 dB input
pad, +24 dBu with the pad.
Volume control slider; adjust by grabbing
slider with mouse or by using up/down
arrows. Settings adjustable from “0” to -50
in 1 dB steps, then to -100 dB in one step;
settings below -8 dB prevent the loud-
speaker from reaching full output.
Inv. button inverts the input signal polarity;
glows green when signal is inverted. Use
with caution.
$PSOL¿HUWHPSHUDWXUHLQGLFDWRUDQG
bar graph.
Save button
7H[W¿HOGVIRUHQWHULQJDQDPHIRUWKH
loudspeaker and listing its location.
Press Wink with Light button to turn the
loudspeaker’s wink light on and off to aid in
identifying the loudspeaker and its location.
Press Wink with Audio to send a Tone
signal or Pink Noise to the loudspeaker.
2XWSXWVWDWXVLQGLFDWRUVIRUHDFKDPSOL¿HU
See Status Indicators below for details.
Output bar graph. “0” represents the
maximum uncompressed output level;
positive values indicate how far the signal
is overshooting into limiting; negative
values indicate the amount of headroom
left before the onset of limiting.
Mute button mutes the entire loudspeaker.
Press to restart the loudspeakers DSP in
the event of a malfunction.
Power On/Standby button. Turns ampli-
¿HU2QRUSODFHVLWLQ6WDQGE\7XUQLQJ
AC power to the Array On and Off is a
separate operation.
Loudspeakers DSP sample rate (48 kHz or
N+]6HH$SSHQGL[OOOIRUPRUHGHWDLOV
16
CONNECT
Summary of Contents for CF Series RHAON
Page 55: ......
