AKT – Operating instruction for refrigerant drier
AKT-4
Appendix KT refrigerant drier (cont.)
Before completing any maintenance work, please follow all
safety provisions for electrical systems and electrical de-
vices (see Chapter 1 of the original operating manual).
The compressed air refrigerant drier must be mainained at dif-
ferent intervals. The maintenance intervals heavily depend on
the utilisation type and the conditions oft he installation site. The
following maintenance work must be completed daily:
1. Check the function of the steam trap; check if water is
drained; valve test (manual drain condensation):
2. Check the pressure dew point display; for deviations
from the normal range, see chapter 5.2.2 and 5.2.3 in
the original operating manual
3. Check the compressor for contamination
Specific notes about other maintenance intervals and work
can be found in the manufacturer original operating manual
under Point 5 Maintenance.
Maintenance
