108
Endura
®
Delta
en
User
Manual mode
• If you have chosen to control the Endura Delta with an XVK 4-position switch, you can place
the unit in manual mode permanently. In this case, you choose to always ventilate at the same
ventilation level (auto, L2, L3 or L4). The LED for the active ventilation level lights up on the XVK
4-position switch.
An M is displayed at the bottom left of the TouchDisplay as long as the
manual mode is active on the XVK 4-position switch.
You can return to the automatic mode by pushing the XVK 4-position
switch to AUTO.
Note:
The Endura Delta demand-control (RH & VOC) is only active in automatic mode. In the
“Manual mode”, you can choose a fixed ventilation level for a specific period of time. This
manual mode does not take the sensor values into account; therefore, the ventilation flow rate
will not be adjusted in case of an increase in the relative humidity or VOC.
MAIN MENU
USER MENU
Briefly tap
■
Briefly tap
▲
and
▼
simultaneously OR
tap
■
for at least
3 seconds
11.1.3 • User menu
The User menu is used to activate the timer, configure your program points, view the data on how
your unit is operating, change the settings for your unit, etc.
You can open the User menu by briefly tapping
■
.
To return to the Main menu, briefly tap
▲
and
▼
simultaneously, or tap
■
for 3 seconds.
Summary of Contents for Endura Delta 330
