115
Endura
®
Delta
en
User
To close the “Schedule” User menu, tap
■
for at least 3 seconds or
briefly tap
▲
and
▼
.
11.1.3.3 • Data
You can request current information on the Endura Delta operation using the “Data” menu. You
can see which mode is active, the total supply and extraction flow rates, outdoor and indoor
temperature, relative humidity level, indoor air quality (VOC), and when the filter must be
replaced. This menu is only available from the Main Controller.
Select “Data” in the USER MENU, and confirm by tapping
■
.
The active ventilation level (L1-L4) is displayed in this bar.
11.1.3.3.1 • Active mode
The total exhaust flow rate for the home is displayed in this bar. This
is the sum of all the extraction flow rates in your home (all wet rooms).
Given that the Endura Delta is a balanced system, the total extraction
flow rate is always equal to the total supply flow rate (deviations are
possible here when the Fireplace function is active).
11.1.3.3.2 • Exhaust flow rate
The total supply flow rate for the home is displayed in this bar. This is
the sum of all the supply flow rates in your home (all dry rooms). Given
that the Endura Delta is a balanced system, the total extraction flow rate
is always equal to the total supply flow rate (deviations are possible
here when the Fireplace function is active).
11.1.3.3.3 • Supply flow rate
Summary of Contents for Endura Delta 330
