127
Endura
®
Delta
en
User
11.1.3.4.1.8
•
Error Log
You can see which error messages have occurred using this menu. An error message is indicated
on the main display by an exclamation point in a red triangle. Every error message is indicated
by a code and is linked to the time at which the error occurred. You can read Chapter 11 for the
exact meanings of the error messages.
Select “Error Log” using
▲
and
▼
, and confirm by tapping
■
.
To exit the menu, briefly tap
▲
and
▼
simultaneously.
You can delete the old error messages by tapping “Clear”.
Tap
■
to clear the list and restart the unit.
11.1.3.4.1.9
•
C-Mode
You can activate the “C-mode” (design position) using this menu. If the C-mode is active, then
the Endura Delta nominally ventilates for 30 minutes. You can calibrate the system during this
half hour by adjusting the supply and extraction valves. The flow rates must be verified when the
C mode is activated.
Select “C-mode” using
▲
and
▼
, and confirm by tapping
■
.
To exit the menu, briefly tap
▲
and
▼
simultaneously.
Activate the C-mode by tapping
■
. A 30-minute timer is started, and the
Endura Delta nominally ventilates during this period.
Summary of Contents for Endura Delta 330
