24
Endura
®
Delta
en
Installer
6.2 • Installation
6.2.1 • Conversion from left-hand model to right-hand model
It is possible to convert a standard left-hand model to a right-hand model. On a right-hand model
the position of the filters and bypass are on the right-hand side. You can find the instructions to do
this conversion here below.
④
②
①
⑤
③
⑥
Unscrew the top cover and
disconnect the control panel
connector from the circuit
board.
Remove the filter covers and
their filters from the unit.
Disconnect the control panel
connector from the glass
panel.
Remove the 4 screws
from the front panel and
disconnect the front panel by
pushing up the panel.
Disconnect the hinge arm
from the glass panel and
remove the glass panel from
the hinges.
Disassemble the hinges and
the hinge arm, turn the front
panel 180° and mount the
hinges and the hinge arm
on the same place (the right-
hand side where the filters
are).
Summary of Contents for Endura Delta 330
