85
Endura
®
Delta
en
Installer
9.2 • Maintenance
Contact your installer to schedule a thorough inspection and cleaning of your unit.
We recommend having the unit inspected every year and cleaned at least every three years.
Make sure that the unit is turned off and unplugged before starting to service it for maintenance!
9.2.1
•
Cleaning/replacing filters
Make sure that the unit is turned off and unplugged before removing the filters!
➀
➁
• Open the door and remove
the filter caps.
• Before removing the filters
from the openings, be sure
to clearly mark which filter
was on top and which filter
was on bottom, and in which
direction they are placed, so
that it is easy to return them
to the correct position after
cleaning.
➂
• Clean the filters using a vacuum. If you regularly vacuum the
filters, the filters could show signs of wear and tear. In this
case, replace the filter in order to continue to guarantee the
correct operation of the system.
Note:
– If you use 2 G4 filters,
mark their positions and
direction, and return them
to the correct position
after cleaning.
– If you combine an F7
and G4 filter, then you
must always place the F7
filter underneath and the
G4 filter on top! Mark
the positions in which
they were placed and
return them to the correct
position after cleaning.
Summary of Contents for Endura Delta 330
