© RENU Electronics Pvt. Ltd.
Page
3
of
22
Introduction
The Web HMI is a ThinClient with an inbuilt browser which connects to a remote web server on
its network.
All WP6 devices are compliant with EMC directive 2014/30/EU and LVD directive 2014/35/EU
and certified for UL Class I Div. 2.
This user manual gives a detailed information regarding the hardware specifications, operating
conditions, installation, mounting and wiring. All the information published in this manual is
produced and governed by RENU Electronics Pvt. Ltd. and is protected by Indian Copyright
Act.
Before you start
▪
RENU Electronics Pvt. Ltd is not responsible or liable for any indirect or consequential
damage resulting from the use of this product.
▪
The user should check and confirm the suitability of the product before using in any specific
application.
▪
The diagrams and examples in this manual are included for illustration purposes only.
RENU Electronics assume no responsibility or liability regarding actual use based on the
diagrams or examples shown.
▪
Reproduction of the contents of this manual, in any form (in part or in whole), is strictly
prohibited.
▪
Following table shows various symbols that may be used in this manual to provide
information regarding safety, precautions and usage of the product:
WARNING:
Indicates circumstances that may cause an explosion in hazardous
environment, which may lead to injury or death, damage or economic loss
CAUTION:
Indicates specific precautions to be taken by user during installation,
operation and maintenance of the product
ATTENTION
ATTENTION:
Indicates important information regarding application and functions of
the product
