English
English
9
10
Mount the Camera
• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Or, it may result in poor image quality
because of the window glare by infrared LEDs, ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may
result in poor image quality. To ensure best image quality, the lighting condition for both the
camera and the capture object shall be the same.
• To ensure better image quality, it’s recommended to clean the lens with a soft cloth from
time to time.
• Make sure the power ports are not directly exposed to water or moisture and not blocked
by dirt or other elements.
• With IP waterproof ratings, the camera can work properly under conditions like rain and
snow. However, it doesn't mean the camera can work underwater.
• Do not install the camera at places where rain and snow can hit the lens directly.
• The camera may work in extreme cold conditions as low as -25°C. Because when it is
powered on, the camera will produce heat. You may power on the camera indoors for a few
minutes before installing it outdoors.
• Try to keep the left lens level with the right lens.
Drill holes in accordance with the mounting template, Secure the mounting plate to the wall
with the upper two screws and hang the camera on it. Then lock the camera in position
with the lower screw.
The following installation methods take the WiFi camera as an example and also apply to
the PoE camera.
Installation Tips
Mount the Camera to the Wall
NOTE:
Use the drywall anchors inclued in the package if needed.
RST
RST
RST
RST
2
1
2
1
RST
RST
RST
RST
2
1
2
1
RST
RST
RST
RST
2
1
2
1
