10
English
9
English
Mount Tips for the Cameras
• Do not face the camera towards any light sources.
• Do not point the camera towards a glass window. Or, it may result in poor image quality because
of the window glare by infrared LEDs, ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result in
poor image quality. To ensure best image quality, the lighting condition for both the camera and
the capture object shall be the same.
• To ensure better image quality, it’s recommended to clean the lens with a soft cloth from time to
time.
• Make sure the power ports are not directly exposed to water or moisture and not blocked by dirt
or other elements.
• With IP waterproof ratings, the camera can work properly under conditions like rain and snow.
However, it doesn't mean the camera can work underwater.
• Do not install the camera at places where rain and snow can hit the lens directly.
• The camera may work in extreme cold conditions as low as -25°C because it will produce heat
when powered on. You may power the camera indoors for a few minutes before installing it
outdoors.
Set up the NVR System
A setup wizard will guide you through the NVR system configuration process. Please set a
password for your NVR (for the initial access) and follow the wizard to configure the system.
NOTE:
The password should be at least 6 characters. It is recommended that you note down the
password and keep it in a secure place.
Access the System via Smartphone or PC
Download and launch the Reolink App or Client software and follow the instructions to access the
NVR.
• On Smartphone
• On PC
Scan to download the Reolink App.
Download path: Go to
https://reolink.com
> Support > App & Client.
